RoomFailures Properties

Name	Return Type	Description
P AreaTagBadViewType	FailureDefinitionId	Can't Copy Area Tags. The target view doesn't have the same Area Scheme as the original view.
P AreaUnplaceWarning	FailureDefinitionId	An Area was deleted from all model views but still remains in this project. \n The area can be removed from any schedule or placed back in the model using the Area command.
P CannotMakeRoomsGeometry	FailureDefinitionId	Could not create geometry for [Room].
P ExtensionsOverlapWarning	FailureDefinitionId	Vertical Extensions on these Walls overlap. This can cause undesirable Joins. Try starting with no overlap and extend the Walls toward one another.
P InvalidReflectivityPercentage	FailureDefinitionId	The value for Reflectivity must be between 0 and 1.
P InvisibleRoomBoundElemement	FailureDefinitionId	[Room] Bounding element is invisible in current view.
P LoadareaRecovered	FailureDefinitionId	The boundary encloses the region for area based load:[Areabasedload].
P NoReferenceRecenteredWarning	FailureDefinitionId	0 room reference has been re-centered.
P OptionConflictBoundariesVaryMainAddToOptionSet	FailureDefinitionId	Option Conflict between Rooms.\nRoom boundary in the Main Model differs from the apparent boundary in view '[View Name]'.\nTo resolve, select the Main Model Room and use the Add to Design Option Set command.
P OptionConflictBoundariesVaryMainSeparate	FailureDefinitionId	Option Conflict between Rooms.\nRoom boundary in the Main Model differs from the apparent boundary in view '[View Name]'.\nTo resolve, divide space with Room Separation Lines in the Main Model.
P OptionConflictBoundariesVaryOptionSeparate	FailureDefinitionId	Option Conflict between Rooms.\nRoom boundary differs from the apparent boundary in view '[View Name]'.\nTo resolve, divide space with Room Separation Lines in the Main Model.
P OptionConflictInLinkBoundariesVaryMainAddToOptionSet	FailureDefinitionId	Option conflict between rooms in the Revit link '[Link Instance Name]'.\nThe room boundary in the main model of the Revit link differs from the apparent boundary in the linked view '[View Name from Link]'.\nTo resolve the issue, open the Revit link file for editing, select the main model room, and use the Add to Design Option Set tool.
P OptionConflictInLinkBoundariesVaryMainSeparate	FailureDefinitionId	Option conflict between rooms in the Revit link '[Link Instance Name]'.\nThe room boundary in the main model of the Revit link differs from the apparent boundary in the linked view '[View Name from Link]'.\nTo resolve the issue, open the Revit link file for editing, and use room separation lines to divide the space in the main model.
P OptionConflictInLinkBoundariesVaryOptionSeparate	FailureDefinitionId	Option conflict between rooms in the Revit link '[Link Instance Name]'.\nThe room boundary differs from the apparent boundary in the linked view '[View Name from Link]'.\nTo resolve the issue, open the Revit link file for editing, and use room separation lines to divide the space in the main model.
P OptionConflictInLinkRoomOverlapMain	FailureDefinitionId	Option conflict between rooms in the Revit link '[Link Instance Name]'.\nThe room in the Revit link's option '[Option Name in Link]' overlaps a room in the main model.\nTo resolve the issue, open the Revit link file for editing, select the main model room, and use the Add to Design Option Set tool.
P OptionConflictInLinkRoomOverlapOption	FailureDefinitionId	Option conflict between rooms in the Revit link '[Link Instance Name]'.\nA room in the Revit link's option '[Option #1 Name in Link]' overlaps a room in the Revit link's option '[Option #2 Name in Link]'.\nTo resolve the issue, open the Revit link file for editing, and delete the duplicate room or use room separation lines to divide the space in the main model.
P OptionConflictRoomOverlapMain	FailureDefinitionId	Option Conflict between Rooms.\nRoom in Option '[Option Name]' overlaps Room in the Main Model.\nTo resolve, select the Main Model Room and use the Add to Design Option Set command.
P OptionConflictRoomOverlapOption	FailureDefinitionId	Option Conflict between Rooms.\nRoom in Option '[Option Name]' overlaps Room in Option '[Option Name]'.\nTo resolve, delete the duplicate Room or divide space with Room Separation Lines in the Main Model.
P RoomBaseAboveComputationHeight	FailureDefinitionId	[RoomBase]'s lower offset is above the Computation Height
P RoomBelowCompHeight	FailureDefinitionId	[Room] Volume is being calculated above the Upper Limit of this [Room]. Change the Upper Limit and Offset or change the height of volume calculations.
P RoomBoundaryMisalignment	FailureDefinitionId	[Room] bounding element might be misaligned.
P RoomHeightNegative	FailureDefinitionId	[Room] must have a height greater than 0.
P RoomLevelElevs	FailureDefinitionId	A [Room]s Upper Limit must be above its Base Level.
P RoomNotEnclosed	FailureDefinitionId	[Room] is not in a properly enclosed region
P RoomNotEnclosedAreas	FailureDefinitionId	[Room] is not in a properly enclosed region
P RoomNotEnclosedLoadAreas	FailureDefinitionId	[Room] is not in a properly enclosed region
P RoomNotEnclosedRooms	FailureDefinitionId	[Room] is not in a properly enclosed region
P RoomNotEnclosedSpaces	FailureDefinitionId	[Room] is not in a properly enclosed region
P RoomsCreatedAutomatically	FailureDefinitionId	[Room] [Room] created automatically.
P RoomsFailed	FailureDefinitionId	[Room] computations only succeeded without considering the following elements.
P RoomsInSameRegion	FailureDefinitionId	Multiple [Room] are in the same enclosed region. The correct area and perimeter will be assigned to one [Room] and the others will display "Redundant [Room]." You should separate the regions, delete the extra [Room], or move them into different regions.
P RoomsInSameRegionAreas	FailureDefinitionId	Multiple [Room] are in the same enclosed region. The correct area and perimeter will be assigned to one [Room] and the others will display "Redundant [Room]." You should separate the regions, delete the extra [Room], or move them into different regions.
P RoomsInSameRegionLoadAreas	FailureDefinitionId	Multiple [Room] are in the same enclosed region. The correct area and perimeter will be assigned to one [Room] and the others will display "Redundant [Room]." You should separate the regions, delete the extra [Room], or move them into different regions.
P RoomsInSameRegionRooms	FailureDefinitionId	Multiple [Room] are in the same enclosed region. The correct area and perimeter will be assigned to one [Room] and the others will display "Redundant [Room]." You should separate the regions, delete the extra [Room], or move them into different regions.
P RoomsInSameRegionSpaces	FailureDefinitionId	Multiple [Room] are in the same enclosed region. The correct area and perimeter will be assigned to one [Room] and the others will display "Redundant [Room]." You should separate the regions, delete the extra [Room], or move them into different regions.
P RoomsOverlapInHeight	FailureDefinitionId	[Room] volumes overlap. Adjust the Upper Limit and Limit Offset properties of the [rooms].
P RoomsReallyFailed	FailureDefinitionId	[Room] computations failed. Try to modify the following elements.
P RoomTagBadViewType	FailureDefinitionId	[Room] Tags can only be placed in Floor Plan, Reflected Ceiling Plan and Section Views.
P RoomTagDeleted	FailureDefinitionId	A [Room] Tag was deleted, but the corresponding [Room] still exists. You can place another tag for the [Room] using the [Room] Tag tool or select the [Room] and delete it.
P RoomTagNotInRoom	FailureDefinitionId	[Room] Tag is outside of its [Room]. Enable Leader or move [Room] Tag within its [Room].
P RoomTagNotInRoomToArea	FailureDefinitionId	[Room] Tag is outside of its [Room]. Enable Leader or move [Room] Tag within its [Room].
P RoomTagNotInRoomToRoom	FailureDefinitionId	[Room] Tag is outside of its [Room]. Enable Leader or move [Room] Tag within its [Room].
P RoomTagNotInRoomToSpace	FailureDefinitionId	[Room] Tag is outside of its [Room]. Enable Leader or move [Room] Tag within its [Room].
P RoomTagVolumeNotComputed	FailureDefinitionId	[Room] Tag is displaying volume that can't be computed.
P RoomTooShort	FailureDefinitionId	[Room] is very short. If this is not intended, change its Upper Limit and Offset.
P RoomUnplaceWarning	FailureDefinitionId	A Room was deleted from all model views but still remains in this project. \n The room can be removed from any schedule or placed back in the model using the Room command.
P ShowRoomBoundingElements	FailureDefinitionId	[Room] Bounding elements are highlighted.
P SpaceUnplaceWarning	FailureDefinitionId	A Space was deleted from all model views but still remains in this project. \n The Space can be removed from any schedule or placed back in the model using the Space command.