WallSweepInfo Properties

Name	Return Type	Description
P CutsWall	bool	Indicates if you want the sweep to cut geometry out of the host wall.
P DefaultSetback	double	The sweep setback distance from inserts, such as windows and doors.
P Distance	double	Represents the distance from either the top or base of the wall for horizontal sweeps, or the parameter along the wall's path curve for vertical ones.
P DistanceMeasuredFrom	DistanceMeasuredFrom	Indicates if Distance is measured from the top or bottom of the wall.
P Id	int	The id of the sweep or reveal.
P IsCutByInserts	bool	Indicates if the sweep is cut by wall inserts.
P IsFixed	bool	Indicates if the described wall sweep is fixed. A sweep is fixed if it is a part of a vertical compound structure.
P IsProfileFlipped	bool	Indicates if the profile is applied upside-down.
P IsValidObject	Boolean	Specifies whether the .NET object represents a valid Revit entity.
P IsVertical	bool	Indicates whether the sweep or reveal is swept vertically or horizontally.
P MaterialId	ElementId	The element id of the material used to create the sweep or reveal.
P ProfileId	ElementId	The element id of the profile family used to create the sweep or reveal.
P WallOffset	double	The offset from the sweep or reveal to the wall.
P WallSide	WallSide	The side of the wall to which the sweep or reveal is attached.
P WallSweepOrientation	WallSweepOrientation	Indicates how the profile of a horiztonal sweep is oriented with repect to the wall side face.
P WallSweepType	WallSweepType	The type (either a wall sweep or a reveal).