PathOfTravel

PathOfTravel.FindEndsOfShortestPaths(View, IList<XYZ>, IList<XYZ>)

DBView	View	The floor plan view to use when computing the points.
destinationPoints	IList<XYZ>	Destination points. The input Z coordinates are ignored and set to the view's level elevation.
startPoints	IList<XYZ>	Start points for which shortest path end points are calculated.
→ returns	nullNothingnullptr→IList	End points of paths calculated from each start point to its corresponding closest destination. If a path cannot be calculated the corresponsing end point is set to the corresponding start point.

PathOfTravel.FindShortestPaths(View, IList<XYZ>, IList<XYZ>)

DBView	View	The floor plan view to use when computing the points.
destinationPoints	IList<XYZ>	Destination points. The input Z coordinates are ignored and set to the view's level elevation.
startPoints	IList<XYZ>	Start points for which shortest paths are calculated.
→ returns	nullNothingnullptr→IList	Array of paths calculated from each start point to its corresponding closest destination. If a path cannot be caculated the corresponsing sub-array is set to an empty array.

PathOfTravel.Create(View, XYZ, XYZ, PathOfTravelCalculationStatus%)

DBView	View	The floor plan view to use when computing the shortest distance.
pathStart	XYZ	The start point of the path. The input Z coordinates are ignored and set to the view's level elevation.
pathEnd	XYZ	The end point of the path. The input Z coordinates are ignored and set to the view's level elevation.
resultStatus	PathOfTravelCalculationStatus%	Result status of path of travel creation.
→ returns	PathOfTravel→nullNothingnullptr	The newly created path of travel element, or null Nothing nullptr a null reference ( Nothing in Visual Basic) if no path between the two points is found.

PathOfTravel.Create(View, XYZ, XYZ)

DBView	View	The floor plan view to use when computing the shortest distance.
pathStart	XYZ	The start point of the path. The input Z coordinates are ignored and set to the view's level elevation.
pathEnd	XYZ	The end point of the path. The input Z coordinates are ignored and set to the view's level elevation.
→ returns	PathOfTravel→nullNothingnullptr	The newly created path of travel element, or null Nothing nullptr a null reference ( Nothing in Visual Basic) if no path between the two points is found.

PathOfTravel.CreateMapped(View, IList<XYZ>, IList<XYZ>)

DBView	View	The floor plan view to use when computing the shortest distance.
pathStarts	IList<XYZ>	The start points of the path. The input Z coordinates are ignored and set to the view's level elevation.
pathEnds	IList<XYZ>	The end points of the path. The input Z coordinates are ignored and set to the view's level elevation.
→ returns	IList→nullNothingnullptr	The array of newly created path of travel elements, or null Nothing nullptr a null reference ( Nothing in Visual Basic) if no path between the two points is found. The number of elements is the number of start points multiplied by the number of end points. The order of elements corresponds to the order of end and then start points in the argument arrays: s0->e0, s1->e0, ... , s0->e1, s1->e1... etc. There are some additional conditions that are checked and if any condition is true the null Nothing nullptr a null reference ( Nothing in Visual Basic) value is returned: View has crop box active and start or end point lies outside of the crop Start and end points are too close

PathOfTravel.CreateMapped(View, IList<XYZ>, IList<XYZ>, IList<PathOfTravelCalculationStatus>)

DBView	View	The floor plan view to use when computing the shortest distance.
pathStarts	IList<XYZ>	The start points of the path. The input Z coordinates are ignored and set to the view's level elevation.
pathEnds	IList<XYZ>	The end points of the path. The input Z coordinates are ignored and set to the view's level elevation.
resultStatus	IList<PathOfTravelCalculationStatus>	Result statuses of each path of travel creation. The order of statuses corresponds to the order of elements in the array returned by the function.
→ returns	IList→nullNothingnullptr	The array of newly created path of travel elements, or null Nothing nullptr a null reference ( Nothing in Visual Basic) if no path between the two points is found. The number of elements is the number of start points multiplied by the number of end points. The order of elements corresponds to the order of end and then start points in the argument arrays: s0->e0, s1->e0, ... , s0->e1, s1->e1... etc. There are some additional conditions that are checked and if any condition is true the null Nothing nullptr a null reference ( Nothing in Visual Basic) value is returned: View has crop box active and start or end point lies outside of the crop Start and end points are too close

PathOfTravel.CreateMultiple(View, IList<XYZ>, IList<XYZ>, IList<PathOfTravelCalculationStatus>)

DBView	View	The floor plan view to use when computing the shortest distance.
pathStarts	IList<XYZ>	The start points of the path. The input Z coordinates are ignored and set to the view's level elevation.
pathEnds	IList<XYZ>	The end points of the path. The input Z coordinates are ignored and set to the view's level elevation.
resultStatus	IList<PathOfTravelCalculationStatus>	Result statuses of each path of travel creation. The order of statuses corresponds to the order of elements in the array returned by the function.
→ returns	IList→nullNothingnullptr	The array of newly created path of travel elements, or null Nothing nullptr a null reference ( Nothing in Visual Basic) if no path between the two points is found. The order of elements corresponds to the order of start/end points in the argument arrays. There are some additional conditions that are checked and if any condition is true the null Nothing nullptr a null reference ( Nothing in Visual Basic) value is returned: View has crop box active and start or end point lies outside of the crop Start and end points are too close

PathOfTravel.CreateMultiple(View, IList<XYZ>, IList<XYZ>)

DBView	View	The floor plan view to use when computing the shortest distance.
pathStarts	IList<XYZ>	The start points of the path. The input Z coordinates are ignored and set to the view's level elevation.
pathEnds	IList<XYZ>	The end points of the path. The input Z coordinates are ignored and set to the view's level elevation.
→ returns	IList→nullNothingnullptr	The array of newly created path of travel elements, or null Nothing nullptr a null reference ( Nothing in Visual Basic) if no path between the two points is found. The order of elements corresponds to the order of start/end points in the argument arrays. There are some additional conditions that are checked and if any condition is true the null Nothing nullptr a null reference ( Nothing in Visual Basic) value is returned: View has crop box active and start or end point lies outside of the crop Start and end points are too close

PathOfTravel.FindShortestPaths(View, IList<XYZ>, IList<XYZ>)

DBView	View	The floor plan view to use when computing the points.
destinationPoints	IList<XYZ>	Destination points. The input Z coordinates are ignored and set to the view's level elevation.
startPoints	IList<XYZ>	Start points for which shortest paths are calculated.
→ returns	IList>→IList	Array of paths calculated from each start point to its corresponding closest destination. If a path cannot be caculated the corresponsing sub-array is set to an empty array.

PathOfTravel.Create(View, XYZ, XYZ, PathOfTravelCalculationStatus%)

DBView	View	The floor plan view to use when computing the shortest distance.
pathStart	XYZ	The start point of the path. The input Z coordinates are ignored and set to the view's level elevation.
pathEnd	XYZ	The end point of the path. The input Z coordinates are ignored and set to the view's level elevation.
resultStatus	PathOfTravelCalculationStatus%	Result status of path of travel creation.
→ returns	PathOfTravel→nullNothingnullptr	The newly created path of travel element, or null Nothing nullptr a null reference ( Nothing in Visual Basic) if no path between the two points is found.

PathOfTravel.Create(View, XYZ, XYZ)

DBView	View	The floor plan view to use when computing the shortest distance.
pathStart	XYZ	The start point of the path. The input Z coordinates are ignored and set to the view's level elevation.
pathEnd	XYZ	The end point of the path. The input Z coordinates are ignored and set to the view's level elevation.
→ returns	PathOfTravel→nullNothingnullptr	The newly created path of travel element, or null Nothing nullptr a null reference ( Nothing in Visual Basic) if no path between the two points is found.

PathOfTravel.CreateMapped(View, IList<XYZ>, IList<XYZ>)

DBView	View	The floor plan view to use when computing the shortest distance.
pathStarts	IList<XYZ>	The start points of the path. The input Z coordinates are ignored and set to the view's level elevation.
pathEnds	IList<XYZ>	The end points of the path. The input Z coordinates are ignored and set to the view's level elevation.
→ returns	IList→nullNothingnullptr	The array of newly created path of travel elements, or null Nothing nullptr a null reference ( Nothing in Visual Basic) if no path between the two points is found. The number of elements is the number of start points multiplied by the number of end points. The order of elements corresponds to the order of end and then start points in the argument arrays: s0->e0, s1->e0, ... , s0->e1, s1->e1... etc. There are some additional conditions that are checked and if any condition is true the null Nothing nullptr a null reference ( Nothing in Visual Basic) value is returned: View has crop box active and start or end point lies outside of the crop Start and end points are too close

PathOfTravel.CreateMapped(View, IList<XYZ>, IList<XYZ>, IList<PathOfTravelCalculationStatus>)

DBView	View	The floor plan view to use when computing the shortest distance.
pathStarts	IList<XYZ>	The start points of the path. The input Z coordinates are ignored and set to the view's level elevation.
pathEnds	IList<XYZ>	The end points of the path. The input Z coordinates are ignored and set to the view's level elevation.
resultStatus	IList<PathOfTravelCalculationStatus>	Result statuses of each path of travel creation. The order of statuses corresponds to the order of elements in the array returned by the function.
→ returns	IList→nullNothingnullptr	The array of newly created path of travel elements, or null Nothing nullptr a null reference ( Nothing in Visual Basic) if no path between the two points is found. The number of elements is the number of start points multiplied by the number of end points. The order of elements corresponds to the order of end and then start points in the argument arrays: s0->e0, s1->e0, ... , s0->e1, s1->e1... etc. There are some additional conditions that are checked and if any condition is true the null Nothing nullptr a null reference ( Nothing in Visual Basic) value is returned: View has crop box active and start or end point lies outside of the crop Start and end points are too close

PathOfTravel.CreateMultiple(View, IList<XYZ>, IList<XYZ>, IList<PathOfTravelCalculationStatus>)

DBView	View	The floor plan view to use when computing the shortest distance.
pathStarts	IList<XYZ>	The start points of the path. The input Z coordinates are ignored and set to the view's level elevation.
pathEnds	IList<XYZ>	The end points of the path. The input Z coordinates are ignored and set to the view's level elevation.
resultStatus	IList<PathOfTravelCalculationStatus>	Result statuses of each path of travel creation. The order of statuses corresponds to the order of elements in the array returned by the function.
→ returns	IList→nullNothingnullptr	The array of newly created path of travel elements, or null Nothing nullptr a null reference ( Nothing in Visual Basic) if no path between the two points is found. The order of elements corresponds to the order of start/end points in the argument arrays. There are some additional conditions that are checked and if any condition is true the null Nothing nullptr a null reference ( Nothing in Visual Basic) value is returned: View has crop box active and start or end point lies outside of the crop Start and end points are too close

PathOfTravel.CreateMultiple(View, IList<XYZ>, IList<XYZ>)

DBView	View	The floor plan view to use when computing the shortest distance.
pathStarts	IList<XYZ>	The start points of the path. The input Z coordinates are ignored and set to the view's level elevation.
pathEnds	IList<XYZ>	The end points of the path. The input Z coordinates are ignored and set to the view's level elevation.
→ returns	IList→nullNothingnullptr	The array of newly created path of travel elements, or null Nothing nullptr a null reference ( Nothing in Visual Basic) if no path between the two points is found. The order of elements corresponds to the order of start/end points in the argument arrays. There are some additional conditions that are checked and if any condition is true the null Nothing nullptr a null reference ( Nothing in Visual Basic) value is returned: View has crop box active and start or end point lies outside of the crop Start and end points are too close

PathOfTravel.FindShortestPaths(View, IList<XYZ>, IList<XYZ>)

DBView	View	The floor plan view to use when computing the points.
destinationPoints	IList<XYZ>	Destination points. The input Z coordinates are ignored and set to the view's level elevation.
startPoints	IList<XYZ>	Start points for which shortest paths are calculated.
→ returns	IList>→IList	Array of paths calculated from each start point to its corresponding closest destination. If a path cannot be caculated the corresponsing sub-array is set to an empty array.

PathOfTravel.Create(View, XYZ, XYZ, PathOfTravelCalculationStatus%)

DBView	View	The floor plan view to use when computing the shortest distance.
pathStart	XYZ	The start point of the path. The input Z coordinates are ignored and set to the view's level elevation.
pathEnd	XYZ	The end point of the path. The input Z coordinates are ignored and set to the view's level elevation.
resultStatus	PathOfTravelCalculationStatus%	Result status of path of travel creation.
→ returns	PathOfTravel→nullNothingnullptr	The newly created path of travel element, or null Nothing nullptr a null reference ( Nothing in Visual Basic) if no path between the two points is found.

PathOfTravel.Create(View, XYZ, XYZ)

DBView	View	The floor plan view to use when computing the shortest distance.
pathStart	XYZ	The start point of the path. The input Z coordinates are ignored and set to the view's level elevation.
pathEnd	XYZ	The end point of the path. The input Z coordinates are ignored and set to the view's level elevation.
→ returns	PathOfTravel→nullNothingnullptr	The newly created path of travel element, or null Nothing nullptr a null reference ( Nothing in Visual Basic) if no path between the two points is found.

PathOfTravel.CreateMapped(View, IList<XYZ>, IList<XYZ>)

DBView	View	The floor plan view to use when computing the shortest distance.
pathStarts	IList<XYZ>	The start points of the path. The input Z coordinates are ignored and set to the view's level elevation.
pathEnds	IList<XYZ>	The end points of the path. The input Z coordinates are ignored and set to the view's level elevation.
→ returns	IList→nullNothingnullptr	The array of newly created path of travel elements, or null Nothing nullptr a null reference ( Nothing in Visual Basic) if no path between the two points is found. The number of elements is the number of start points multiplied by the number of end points. The order of elements corresponds to the order of end and then start points in the argument arrays: s0->e0, s1->e0, ... , s0->e1, s1->e1... etc. There are some additional conditions that are checked and if any condition is true the null Nothing nullptr a null reference ( Nothing in Visual Basic) value is returned: View has crop box active and start or end point lies outside of the crop Start and end points are too close

PathOfTravel.CreateMapped(View, IList<XYZ>, IList<XYZ>, IList<PathOfTravelCalculationStatus>)

DBView	View	The floor plan view to use when computing the shortest distance.
pathStarts	IList<XYZ>	The start points of the path. The input Z coordinates are ignored and set to the view's level elevation.
pathEnds	IList<XYZ>	The end points of the path. The input Z coordinates are ignored and set to the view's level elevation.
resultStatus	IList<PathOfTravelCalculationStatus>	Result statuses of each path of travel creation. The order of statuses corresponds to the order of elements in the array returned by the function.
→ returns	IList→nullNothingnullptr	The array of newly created path of travel elements, or null Nothing nullptr a null reference ( Nothing in Visual Basic) if no path between the two points is found. The number of elements is the number of start points multiplied by the number of end points. The order of elements corresponds to the order of end and then start points in the argument arrays: s0->e0, s1->e0, ... , s0->e1, s1->e1... etc. There are some additional conditions that are checked and if any condition is true the null Nothing nullptr a null reference ( Nothing in Visual Basic) value is returned: View has crop box active and start or end point lies outside of the crop Start and end points are too close

PathOfTravel.CreateMultiple(View, IList<XYZ>, IList<XYZ>, IList<PathOfTravelCalculationStatus>)

DBView	View	The floor plan view to use when computing the shortest distance.
pathStarts	IList<XYZ>	The start points of the path. The input Z coordinates are ignored and set to the view's level elevation.
pathEnds	IList<XYZ>	The end points of the path. The input Z coordinates are ignored and set to the view's level elevation.
resultStatus	IList<PathOfTravelCalculationStatus>	Result statuses of each path of travel creation. The order of statuses corresponds to the order of elements in the array returned by the function.
→ returns	IList→nullNothingnullptr	The array of newly created path of travel elements, or null Nothing nullptr a null reference ( Nothing in Visual Basic) if no path between the two points is found. The order of elements corresponds to the order of start/end points in the argument arrays. There are some additional conditions that are checked and if any condition is true the null Nothing nullptr a null reference ( Nothing in Visual Basic) value is returned: View has crop box active and start or end point lies outside of the crop Start and end points are too close

PathOfTravel.CreateMultiple(View, IList<XYZ>, IList<XYZ>)

DBView	View	The floor plan view to use when computing the shortest distance.
pathStarts	IList<XYZ>	The start points of the path. The input Z coordinates are ignored and set to the view's level elevation.
pathEnds	IList<XYZ>	The end points of the path. The input Z coordinates are ignored and set to the view's level elevation.
→ returns	IList→nullNothingnullptr	The array of newly created path of travel elements, or null Nothing nullptr a null reference ( Nothing in Visual Basic) if no path between the two points is found. The order of elements corresponds to the order of start/end points in the argument arrays. There are some additional conditions that are checked and if any condition is true the null Nothing nullptr a null reference ( Nothing in Visual Basic) value is returned: View has crop box active and start or end point lies outside of the crop Start and end points are too close

PathOfTravel.FindShortestPaths(View, IList<XYZ>, IList<XYZ>)

DBView	View	The floor plan view to use when computing the points.
destinationPoints	IList<XYZ>	Destination points. The input Z coordinates are ignored and set to the view's level elevation.
startPoints	IList<XYZ>	Start points for which shortest paths are calculated.
→ returns	IList>→IList	Array of paths calculated from each start point to its corresponding closest destination. If a path cannot be caculated the corresponsing sub-array is set to an empty array.

PathOfTravel.Create(View, XYZ, XYZ, PathOfTravelCalculationStatus%)

DBView	View	The floor plan view to use when computing the shortest distance.
pathStart	XYZ	The start point of the path. The input Z coordinates are ignored and set to the view's level elevation.
pathEnd	XYZ	The end point of the path. The input Z coordinates are ignored and set to the view's level elevation.
resultStatus	PathOfTravelCalculationStatus%	Result status of path of travel creation.
→ returns	PathOfTravel→nullNothingnullptr	The newly created path of travel element, or null Nothing nullptr a null reference ( Nothing in Visual Basic) if no path between the two points is found.

PathOfTravel.Create(View, XYZ, XYZ)

DBView	View	The floor plan view to use when computing the shortest distance.
pathStart	XYZ	The start point of the path. The input Z coordinates are ignored and set to the view's level elevation.
pathEnd	XYZ	The end point of the path. The input Z coordinates are ignored and set to the view's level elevation.
→ returns	PathOfTravel→nullNothingnullptr	The newly created path of travel element, or null Nothing nullptr a null reference ( Nothing in Visual Basic) if no path between the two points is found.

PathOfTravel.CreateMapped(View, IList<XYZ>, IList<XYZ>)

DBView	View	The floor plan view to use when computing the shortest distance.
pathStarts	IList<XYZ>	The start points of the path. The input Z coordinates are ignored and set to the view's level elevation.
pathEnds	IList<XYZ>	The end points of the path. The input Z coordinates are ignored and set to the view's level elevation.
→ returns	IList→nullNothingnullptr	The array of newly created path of travel elements, or null Nothing nullptr a null reference ( Nothing in Visual Basic) if no path between the two points is found. The number of elements is the number of start points multiplied by the number of end points. The order of elements corresponds to the order of end and then start points in the argument arrays: s0->e0, s1->e0, ... , s0->e1, s1->e1... etc. There are some additional conditions that are checked and if any condition is true the null Nothing nullptr a null reference ( Nothing in Visual Basic) value is returned: View has crop box active and start or end point lies outside of the crop Start and end points are too close

PathOfTravel.CreateMapped(View, IList<XYZ>, IList<XYZ>, IList<PathOfTravelCalculationStatus>)

DBView	View	The floor plan view to use when computing the shortest distance.
pathStarts	IList<XYZ>	The start points of the path. The input Z coordinates are ignored and set to the view's level elevation.
pathEnds	IList<XYZ>	The end points of the path. The input Z coordinates are ignored and set to the view's level elevation.
resultStatus	IList<PathOfTravelCalculationStatus>	Result statuses of each path of travel creation. The order of statuses corresponds to the order of elements in the array returned by the function.
→ returns	IList→nullNothingnullptr	The array of newly created path of travel elements, or null Nothing nullptr a null reference ( Nothing in Visual Basic) if no path between the two points is found. The number of elements is the number of start points multiplied by the number of end points. The order of elements corresponds to the order of end and then start points in the argument arrays: s0->e0, s1->e0, ... , s0->e1, s1->e1... etc. There are some additional conditions that are checked and if any condition is true the null Nothing nullptr a null reference ( Nothing in Visual Basic) value is returned: View has crop box active and start or end point lies outside of the crop Start and end points are too close

PathOfTravel.CreateMultiple(View, IList<XYZ>, IList<XYZ>, IList<PathOfTravelCalculationStatus>)

DBView	View	The floor plan view to use when computing the shortest distance.
pathStarts	IList<XYZ>	The start points of the path. The input Z coordinates are ignored and set to the view's level elevation.
pathEnds	IList<XYZ>	The end points of the path. The input Z coordinates are ignored and set to the view's level elevation.
resultStatus	IList<PathOfTravelCalculationStatus>	Result statuses of each path of travel creation. The order of statuses corresponds to the order of elements in the array returned by the function.
→ returns	IList→nullNothingnullptr	The array of newly created path of travel elements, or null Nothing nullptr a null reference ( Nothing in Visual Basic) if no path between the two points is found. The order of elements corresponds to the order of start/end points in the argument arrays. There are some additional conditions that are checked and if any condition is true the null Nothing nullptr a null reference ( Nothing in Visual Basic) value is returned: View has crop box active and start or end point lies outside of the crop Start and end points are too close

PathOfTravel.CreateMultiple(View, IList<XYZ>, IList<XYZ>)

DBView	View	The floor plan view to use when computing the shortest distance.
pathStarts	IList<XYZ>	The start points of the path. The input Z coordinates are ignored and set to the view's level elevation.
pathEnds	IList<XYZ>	The end points of the path. The input Z coordinates are ignored and set to the view's level elevation.
→ returns	IList→nullNothingnullptr	The array of newly created path of travel elements, or null Nothing nullptr a null reference ( Nothing in Visual Basic) if no path between the two points is found. The order of elements corresponds to the order of start/end points in the argument arrays. There are some additional conditions that are checked and if any condition is true the null Nothing nullptr a null reference ( Nothing in Visual Basic) value is returned: View has crop box active and start or end point lies outside of the crop Start and end points are too close

PathOfTravel.FindShortestPaths(View, IList<XYZ>, IList<XYZ>)

DBView	View	The floor plan view to use when computing the points.
destinationPoints	IList<XYZ>	Destination points. The input Z coordinates are ignored and set to the view's level elevation.
startPoints	IList<XYZ>	Start points for which shortest paths are calculated.
→ returns	IList>→IList	Array of paths calculated from each start point to its corresponding closest destination. If a path cannot be caculated the corresponsing sub-array is set to an empty array.