ConnectorFailures

Description:
Failures about Connector.

Inheritance Hierarchy:
System.Object
Autodesk.Revit.DB.BuiltInFailures.ConnectorFailures

public static class ConnectorFailures

Public NotInheritable Class ConnectorFailures

public ref class ConnectorFailures abstract sealed

[<AbstractClassAttribute>]
[<SealedAttribute>]
type ConnectorFailures = class end

Name	Return Type	Description
P AirTerminalCenterNotAligned	FailureDefinitionId	The center of the Air Terminal doesn't align at (0,0,0): align the Air Terminal Center to the Origin Defining Reference Planes could help to solve the problem.
P AllElementsRemovedFromCircuitGroup	FailureDefinitionId	[System] is empty and will be deleted.
P DisconnectedElements	FailureDefinitionId	Elements are disconnected!
P ElementAssignedToDefaultSystem	FailureDefinitionId	At least one connector on the highlighted element is currently assigned to the [Element Name]. In general items shouldn't be assigned to the Default Systems, but should be assigned as equipments or elements of a non-default system. Click the More Info button below for additional information on System Creation.
P ElementHasMultipleConnectors	FailureDefinitionId	Revit found one or more elements with multiple connectors. Select each element and then select the connectors to use for the analytical connection.
P ElementsAreDisconnected	FailureDefinitionId	Elements need to be disconnected.
P ElementsConnectedToParent	FailureDefinitionId	You have selected elements that are connected to a parent object in a System. These elements cannot be removed from the System.
P ElementsNeedToBeDisconnected	FailureDefinitionId	Elements need to be disconnected.
P ExistsForSelectedElement	FailureDefinitionId	Connections already exists for selected element.
P FittingMustBeOnDuct	FailureDefinitionId	The [Tap] must be attached to duct.
P FittingMustBeOnDuctWarn	FailureDefinitionId	The [Tap] must be attached to duct.
P FittingMustBeOnPipe	FailureDefinitionId	The [Tap] must be attached to pipe.
P FittingMustBeOnPipeWarn	FailureDefinitionId	The [Tap] must be attached to pipe.
P InvalidConnectionRef	FailureDefinitionId	The selected fitting has invalid connections and must be deleted to continue.
P InvalidConnector	FailureDefinitionId	The connector is invalid, the size cannot be determined from the connector.
P InvalidLoadClassificationValue	FailureDefinitionId	The load classification parameter cannot be empty. Please select a valid load classification element for the connector parameter and the associated family parameter.
P InvalidPowerFactorValue	FailureDefinitionId	The value for Power Factor must be between 0 and 1.
P JointGenderMismatch	FailureDefinitionId	The element has a connector with a fitting joint gender mismatch
P JointShapeMismatch	FailureDefinitionId	The element has a connector with a fitting joint shape mismatch
P JointSizeMismatch	FailureDefinitionId	The element has a connector with a fitting joint size mismatch
P JointTypeMismatch	FailureDefinitionId	The element has a connector with a fitting joint type mismatch
P LayoutConnector	FailureDefinitionId	[Unassigned System Type] on Connector [Index Number].
P MismatchNoAvailableConnector	FailureDefinitionId	Cannot add [Element] to System. There is no available connector matching the System Type ([Type Name]) for the System.
P MultipleNetwork	FailureDefinitionId	Elements in [System Name] are not connected in a single physical network due to one or both of the following:\n- There are disconnects in the system's physical network.\n- Elements in the system are connected to more than one physical network.
P NetworkValidityError	FailureDefinitionId	The family is connected in a network and can no longer keep the connectivity. Disconnect the family from the network?
P NetworkValidityErrorWasDisconnected	FailureDefinitionId	The family is connected in a network and can no longer keep the connectivity. Disconnect the family from the network?
P NoLossDefined	FailureDefinitionId	No Loss Defined
P NoSupportKCoefficientTable	FailureDefinitionId	"K Coefficient from table" is not supported on connector for the element
P NotAllowedToModifyGroupElementsError	FailureDefinitionId	Connection to a group failed. Modification of elements within a group is not allowed.
P NotAllowedToModifyGroupElementsWarning	FailureDefinitionId	Connection to a group failed. Modification of elements within a group is not allowed.
P OpenConnector	FailureDefinitionId	The element has an open connector
P RbsNetworkValidityError	FailureDefinitionId	The family is connected in a network and can no longer keep the connectivity.
P RemoveConnectorLinksWarn	FailureDefinitionId	The links between connector [Index] and connector [Index], connector [Index] and connector [Index] are removed.
P RemoveConnectorLinkWarn	FailureDefinitionId	The link between connector [Index] and connector [Index] is removed.
P ShapesNotMatch	FailureDefinitionId	Shapes do not match. A connection could not be made.
P SizingCalculationFlowOnlyWarn	FailureDefinitionId	Some elements are not sized because the system calculation is flow only. You may change the system calculation level to size them again.
P SizingCalculationNoneWarn	FailureDefinitionId	Some elements are not sized because the system calculation level is none or performance. You may change the system calculation level to size them again.
P SizingFailed	FailureDefinitionId	Sizing failed.
P UnconnectedCircuit	FailureDefinitionId	The element has an unconnected circuit on its connector
P UnconnectedDevice	FailureDefinitionId	Device has an unconnected [Type Name] connector (index = [Index Number]).
P UndefinedConnector	FailureDefinitionId	Revit does not support Undefined connectors. The following have been replaced by the default connector: [Connector Element]