|
M
AddClippingsToBaseExtrusion(ExporterIFC, Wall, XYZ, IFCRange, IFCRange, IFCAnyHandle, IList<IFCExtrusionData>)
|
IFCAnyHandle
|
|
|
M
AddValueString(Element, ElementId, String)
|
None
|
Adds a string value to a built-in parameter.
|
|
M
AreSolidsEqual(Solid, Solid, Transform%)
|
Boolean
|
Determines whether two solids are identical, potentially offset from each other.
|
|
M
CanExportWallGeometryAsExtrusion(Element, IFCRange, Curve)
|
Boolean
|
Identifies if the base geometry of the wall can be represented as an extrusion.
|
|
M
CollectGeometryInfo(ExporterIFC, IFCGeometryInfo, GeometryObject, XYZ, Boolean)
|
None
|
Collects all the target geometry from the input geometry object and adds it as IFC handles
to the IFCInfo.
|
|
M
CollectGeometryInfo(ExporterIFC, IFCGeometryInfo, GeometryObject, XYZ, Boolean, Transform)
|
None
|
Collects all the target geometry from the input geometry object and adds it as IFC handles
to the IFCInfo.
|
|
M
ComputeAreaOfCurveLoops(IList<CurveLoop>)
|
Double
|
|
|
M
ComputeRoofProjectedArea(Element)
|
Double
|
Returns the projected area of the room, unscaled.
|
|
M
ComputeSubcomponents(HostObject)
|
IList<HostObjectSubcomponentInfo>
|
Splits a roof or floor element composed of planar surfaces into a set of roughly vertical extruded loops of
uniform depth if possible.
|
|
M
CreateAlternateGUID(Element)
|
String
|
Creates a GUID for the given element.
|
|
M
CreateGUID()
|
String
|
Creates a randomized GUID.
|
|
M
CreateProjectLevelGUID(Document, IFCProjectLevelGUIDType)
|
String
|
Creates a GUID from Revit project for given GUIDType.
|
|
M
CreateSubElementGUID(Element, Int32)
|
String
|
Creates a consistent GUID for an IFC entity related to a Revit element.
A "related" sub-element is one that is unique for a given type of element, and can
therefore by identified by a simple index value (e.g. PSet_Wall_Common property set for a wall.)
The index value 0 is reserved, as this would generate the GUID of the element itself.
A listing of known sub-elements is contained in IFCSubElementEnums.cs; it is
expected that this list would be maintained up-to-date, instead of passing arbitrary values
into this function.
|
|
M
EndExportInternal(ExporterIFC)
|
None
|
Use the internal Revit implementation to relate elements at the end of export.
|
|
M
ExportExtrudedSlabOpenings(ExporterIFC, Element, IFCLevelInfo, IFCAnyHandle, IList<IFCAnyHandle>, IList<IList<CurveLoop>>, Plane, IFCProductWrapper)
|
None
|
Obsolete.
|
|
M
ExportExtrudedSlabOpeningsAndReturnInfo(ExporterIFC, Element, IFCLevelInfo, IFCAnyHandle, IList<IFCAnyHandle>, IList<IList<CurveLoop>>, Plane, IFCProductWrapper)
|
IList<IFCOpeningDimensions>
|
|
|
M
ExportSlabAsExtrusion(ExporterIFC, Element, GeometryElement, IFCTransformSetter, IFCAnyHandle, IList<IFCAnyHandle>, IList<IFCAnyHandle>, IList<IList<CurveLoop>>, IList<IFCExtrusionCreationData>, Plane)
|
Boolean
|
|
|
M
GetAttachedColumns(Wall)
|
IList<FamilyInstance>
|
Obtains a list of columns known to Revit as intersecting with this wall.
|
|
M
GetConnectedWalls(Wall, IFCConnectedWallDataLocation)
|
IList<IFCConnectedWallData>
|
Obtains the IFC-specific information regarding the connections between this wall and other elements.
|
|
M
GetDoor2DArcsFromFamily(Family)
|
IList<Arc>
|
Gets the arcs associated with the plan view of a door.
|
|
M
GetElevationProfile(Wall)
|
IList<CurveLoop>
|
Obtains the curve loops which bound the wall's elevation profile.
|
|
M
GetGeometryFromInplaceWall(FamilyInstance)
|
GeometryElement
|
Obtains a special snapshot of the geometry of an in-place wall element suitable for export.
|
|
M
GetGlobal2DDirectionHandle(Int32, Boolean)
|
IFCAnyHandle
|
Obtains the handle representing one cardinal direction in 2D.
|
|
M
GetGlobal2DDirectionHandles(Boolean)
|
IList<IFCAnyHandle>
|
Obsolete. Obtains the handles representing the cardinal directions in 2D.
|
|
M
GetGlobal2DOriginHandle()
|
IFCAnyHandle
|
Obtains the handle representing the 2D origin.
|
|
M
GetGlobal3DDirectionHandle(Int32, Boolean)
|
IFCAnyHandle
|
Obtains the handle representing one cardinal direction in 3D.
|
|
M
GetGlobal3DDirectionHandles(Boolean)
|
IList<IFCAnyHandle>
|
Obsolete. Obtains the handles representing the cardinal directions in 3D.
|
|
M
GetGlobal3DOriginHandle()
|
IFCAnyHandle
|
Obtains the handle representing the 3D origin.
|
|
M
GetInstanceCutoutFromWall(Document, Wall, FamilyInstance, XYZ%)
|
CurveLoop
|
Gets the curve loop corresponding to the hole in the wall made by the instance.
|
|
M
GetLegacyCurtainSubElements(Element)
|
ICollection<ElementId>
|
Gets the sub elements from a legacy curtain element.
|
|
M
GetLegacyStairOrRampComponents(ExporterIFC, Element)
|
IFCLegacyStairOrRamp
|
Gets the components of a stair or ramp.
|
|
M
GetLegacyStairsProperties(ExporterIFC, Element, Int32%, Int32%, Double%, Double%, Double%, Double%, Double%)
|
None
|
Returns one or more properties for legacy (created in R2012 or before) Stairs.
|
|
M
GetLevelIdByHeight(ExporterIFC, Element)
|
ElementId
|
Gets the level if by the height of the element.
|
|
M
GetLoopsFromTopBottomFace(ExporterIFC, Wall)
|
IList<CurveLoop>
|
Gets the curve loop(s) that represent the bottom or top face of the wall, usable to create an extrusion for the wall geometry.
|
|
M
GetMinSymbolHeight(FamilySymbol)
|
Double
|
Obtains the minimum height of the given FamilySymbol.
|
|
M
GetMinSymbolWidth(FamilySymbol)
|
Double
|
Obtains the minimum width of the given FamilySymbol.
|
|
M
GetOpeningData(ExporterIFC, Element, Transform, IFCRange)
|
IList<IFCOpeningData>
|
Gets the openings data from the element.
|
|
M
GetOriginalSymbol(FamilyInstance)
|
FamilySymbol
|
Returns the original family symbol of this family instance, before the instance is modified by
joins, cuts, coping, extensions, or other post-processing.
|
|
M
GetRelativeLocalPlacementOffsetTransform(IFCAnyHandle, IFCAnyHandle)
|
Transform
|
Obtains the relative transform between two IfcLocalPlacement handles.
|
|
M
GetRoofComponents(ExporterIFC, RoofBase)
|
RoofComponents
|
Gets the components of roof slabs.
|
|
M
GetRoomBoundaryAsCurveLoopArray(SpatialElement, SpatialElementBoundaryOptions, Boolean)
|
IList<CurveLoop>
|
Obtains the spatial element boundary curves as an array of CurveLoops, needed for processing into IFC-specific
elements later.
|
|
M
GetTransformForDoorOrWindow(FamilyInstance, FamilySymbol, Boolean, Boolean)
|
Transform
|
Obtains the transform for the door or window instance.
|
|
M
GetUnscaledTransform(ExporterIFC, IFCAnyHandle)
|
Transform
|
Obtains the exact unscaled transform from an IfcLocalPlacement handle.
|
|
M
GetUnscaledTransformWithoutFixOfDirection(ExporterIFC, IFCAnyHandle)
|
Transform
|
Obsolete. Obtains the unscaled transform from an IfcLocalPlacement handle without fix of direction.
|
|
M
GetWallBaseOffset(Wall)
|
Double
|
Obtains the base offset of the wall.
|
|
M
GetWallTrimmedCurve(Wall)
|
Curve
|
Obtains the curve of the wall trimmed or extended according to the end conditions of the wall.
|
|
M
HasElevationProfile(Wall)
|
Boolean
|
Identifies if the wall has a sketched elevation profile.
|
|
M
IsCurveFromOtherElementSketch(CurveElement)
|
Boolean
|
Identifies if the given curve element is generated by another element's
sketch, or if it represents an independent curve element accessible directly
by the user.
|
|
M
IsCurveLoopConvexWithOpenings(CurveLoop, Wall, IFCRange, Boolean%)
|
Boolean
|
Checks if the region bounded by the input curve loop can be represented as the subtraction of 0 or more convex polygons from a base convex polygon.
|
|
M
IsWallBaseRectangular(Wall, Curve)
|
Boolean
|
Identifies if the wall's base can be represented by a direct thickening of the wall's base curve.
|
|
M
IsWallCompletelyClipped(Wall, ExporterIFC, IFCRange)
|
Boolean
|
Determines if the input wall is completely removed by interaction with other elements
within the given range.
|
|
M
IsWallJoinedToTop(Wall)
|
Boolean
|
Checks if wall is joined to top.
|
|
M
SetGlobal2DDirectionHandles(Boolean, IFCAnyHandle, IFCAnyHandle)
|
None
|
Sets the handles representing the cardinal directions in 2D.
|
|
M
SetGlobal2DOriginHandle(IFCAnyHandle)
|
None
|
Obsolete. Sets the handle representing the 2D origin.
|
|
M
SetGlobal3DDirectionHandles(Boolean, IFCAnyHandle, IFCAnyHandle, IFCAnyHandle)
|
None
|
Sets the handles representing the cardinal directions in 3D.
|
|
M
SetGlobal3DOriginHandle(IFCAnyHandle)
|
None
|
Obsolete. Sets the handle representing the 3D origin.
|
|
M
SortCurveLoops(IList<CurveLoop>)
|
IList<IList<CurveLoop>>
|
|
|
M
SortFaceEdges(Face)
|
IList<IList<Int32>>
|
Sorts the edges of a face such that the outer edge loops and their corresponding inner edge loops are
separated.
|
|
M
TransformAndScalePoint(ExporterIFC, XYZ)
|
XYZ
|
Converts a point from global Revit coordinates to current IFC coordinates, including scale.
|
|
M
TransformAndScaleVector(ExporterIFC, XYZ)
|
XYZ
|
Converts a vector from global Revit coordinates to current IFC coordinates, including scale.
|
|
M
UsesInstanceGeometry(FamilyInstance)
|
Boolean
|
Identifies if the family instance has its own geometry, or uses the symbol's geometry with a transform.
|
|
M
ValidateCurveLoops(IList<CurveLoop>, XYZ)
|
IList<CurveLoop>
|
|