Sign in
2027 Members
Changes 0
M

RebarBendData Properties

Name Return Type Description
P BarModelDiameter double Defines the model diameter of the bar. The default value is 0.0. When this is changed, the CrankStraightLength0, CrankStraightLength1, CrankAnledLength0, CrankAnledLength1 will be recomputed.
P BarNominalDiameter double Defines the nominal diameter of the bar. The default value is 0.0.
P BendRadius double The radius of all fillets, except hook fillets, in the Rebar shape. The default value is 0.0.
P CrankAngledLength0 double Identifies the crank angled length at the start. The default value is 0. A positive value means that there is a valid crank. If the value is 0 it means that there is no crank. If the value is negative it means that there is a crank with incorrect values.
P CrankAngledLength1 double Identifies the crank angled length at the end. The default value is 0. A positive value means that there is a valid crank. If the value is 0 it means that there is no crank. If the value is negative it means that there is a crank with incorrect values.
P CrankLength0 double Identifies the crank length at the start. The default value is 0. A positive value means that there is a valid crank. If the value is 0 it means that there is no crank. If the value is negative it means that there is a crank with incorrect values.
P CrankLength1 double Identifies the crank length at the end. The default value is 0. A positive value means that there is a valid crank. If the value is 0 it means that there is no crank. If the value is negative it means that there is a crank with incorrect values.
P CrankOffsetLength0 double Identifies the crank offset length at the start. The default value is 0. A positive value means that there is a valid crank. If the value is 0 it means that there is no crank. If the value is negative it means that there is a crank with incorrect values.
P CrankOffsetLength1 double Identifies the crank offset length at the end. The default value is 0. A positive value means that there is a valid crank. If the value is 0 it means that there is no crank. If the value is negative it means that there is a crank with incorrect values.
P CrankRatio0 double Identifies the crank ratio at the start. The 1:crankRatio that defines the crank slope. The default value is 0. A positive value means that there is a valid crank. If the value is 0 it means that there is no crank. If the value is negative it means that there is a crank with incorrect values.
P CrankRatio1 double Identifies the crank ratio at the end. The 1:crankRatio that defines the crank slope. The default value is 0. A positive value means that there is a valid crank. If the value is 0 it means that there is no crank. If the value is negative it means that there is a crank with incorrect values.
P CrankStraightLength0 double Identifies the crank straight length at the start. The default value is 0. A positive value means that there is a valid crank. If the value is 0 it means that there is no crank. If the value is negative it means that there is a crank with incorrect values.
P CrankStraightLength1 double Identifies the crank straight length at the end. The default value is 0. A positive value means that there is a valid crank. If the value is 0 it means that there is no crank. If the value is negative it means that there is a crank with incorrect values.
P HookAngle0 int The angle (in degrees) of the hook at the start. Must be at least 0 and no more than 180. If the value is 0 it means that there is no hook. The default value is 0. When setting from 0 to another value, all crank lengths for start will be set to 0. When setting this value to 0 HookLength0 will be set to 0.
P HookAngle1 int The angle (in degrees) of the hook at the end. Must be at least 0 and no more than 180. If the value is 0 it means that there is no hook. The default value is 0. When setting from 0 to another value all crank lengths for end will be set to 0. When setting this value to 0 HookLength1 will be set to 0.
P HookBendRadius double The radius of the hook fillets in the Rebar shape. The default value is 0.0.
P HookLength0 double The extension length of the hook at the start. The default value is 0.0.
P HookLength1 double The extension length of the hook at the end. The default value is 0.0.
P IsValidObject Boolean Specifies whether the .NET object represents a valid Revit entity.
P TerminationOrientation0 RebarTerminationOrientation Identifies he orientation of the termination (e.g. hook, crank) at the start. The default value is RebarTerminationOrientation::Left.
P TerminationOrientation1 RebarTerminationOrientation Identifies the orientation of the termination (e.g. hook, crank) at the end. The default value is RebarTerminationOrientation::Left.
P TerminationRotationAngle0 double Identifies the termination's rotation angle (in radians) at the start. The default value is 0.0
P TerminationRotationAngle1 double Identifies he termination's rotation angle (in radians) at the end. The default value is 0.0