Sign in
2022 Class Back to 2022
C

RebarUpdateCurvesData

Version comparison
2020 2021 2022 2023 2024 2025 2025.3 2026 2027

Members across versions

50 members across 9 versions · 14 added later · 6 removed · 6 changed · 6 obsolete

Member-name color: stable · changed · removed · obsolete · added later

Member 2020 2021 2022 2023 2024 2025 2025.3 2026 2027
M Dispose
same same same same same same same same same
M GetAttachmentType
same same same same same same same same same
M GetBarDiameter
same same changed missing missing missing missing missing missing
M GetBarGeometry(Int32)
same same same same same same same same same
M GetBarModelDiameter
not yet introduced not yet introduced added same same same same same same
M GetBarNominalDiameter
not yet introduced not yet introduced added same same same same same same
M GetBarsNumber
same same same same same same same same same
M GetBendingRadius
same same same same same same same same same
M GetChangedCustomHandles
same same same same same same same same same
M GetChangedSharedParameterGUIDs
same same same same same same same same same
M GetCustomConstraints
same same same same same same same same same
M GetCycleCounter
not yet introduced not yet introduced not yet introduced not yet introduced added same same same same
M GetDocument
same same same same same same same same same
M GetEndConstraint
same same same same same same same same same
M GetHookOrientationAngle(Int32)
same same same same same same same changed missing
M GetHookPlaneNormalForBarIdx(Int32, Int32)
same same same same same same same changed missing
M GetHostId
same same same same same same same same same
M GetLayoutRule
same same same same same same same same same
M GetNumberOfBars
same same same same same same same same same
M GetRebarId
same same same same same same same same same
M GetRebarStyle
same same same same same same same same same
M GetStartConstraint
same same same same same same same same same
M GetTerminationPlaneNormalForBarIdx(Int32, Int32)
not yet introduced not yet introduced not yet introduced not yet introduced not yet introduced not yet introduced not yet introduced added same
M GetTerminationRotationAngle(Int32)
not yet introduced not yet introduced not yet introduced not yet introduced not yet introduced not yet introduced not yet introduced added same
M SetCycleCounter(Int32)
not yet introduced not yet introduced not yet introduced not yet introduced added same same same same
M SetHookOrientationAngle(Int32, Double)
same same same same same same same changed missing
M SetHookPlaneNormalForBarIdx(Int32, Int32, XYZ)
same same same same same same same changed missing
M SetTerminationPlaneNormalForBarIdx(Int32, Int32, XYZ)
not yet introduced not yet introduced not yet introduced not yet introduced not yet introduced not yet introduced not yet introduced added same
M SetTerminationRotationAngle(Int32, Double)
not yet introduced not yet introduced not yet introduced not yet introduced not yet introduced not yet introduced not yet introduced added same
P AlignedFreeFormSetOrientationOptions
not yet introduced not yet introduced not yet introduced not yet introduced added same same same changed
P AreOrientationOptionsChanged
not yet introduced not yet introduced not yet introduced not yet introduced added same same same missing
P AreWorkshopInstructionsChanged
same same same same same same same same same
P CycleCounterChanged
not yet introduced not yet introduced not yet introduced not yet introduced added same same same same
P EndConstraintLostTargets
not yet introduced not yet introduced not yet introduced not yet introduced not yet introduced not yet introduced not yet introduced not yet introduced added
P ErrorMessage
same same same same same same same same same
P HostMirrored
same same same same same same same same same
P IsAttachmentTypeChanged
same same same same same same same same same
P IsBarsNumberChanged
same same same same same same same same same
P IsBendingRadiusChanged
same same same same same same same same same
P IsCustomSpacingFormulaChanged
not yet introduced not yet introduced not yet introduced not yet introduced not yet introduced not yet introduced not yet introduced not yet introduced added
P IsEndConstraintChanged
same same same same same same same same same
P IsLayoutChanged
same same same same same same same same same
P IsReversed
same same same same same same same same same
P IsSpacingChanged
same same same same same same same same same
P IsStartConstraintChanged
same same same same same same same same same
P IsStyleChanged
same same same same same same same same same
P IsValidObject
same same same same same same same same same
P Spacing
same same same same same same same same same
P StartConstraintLostTargets
not yet introduced not yet introduced not yet introduced not yet introduced not yet introduced not yet introduced not yet introduced not yet introduced added
P WorkshopInstructions
same same same same same same same same same

Per-version detail

Click a version below to see what changed in that release vs your current frame (2022).
2022 current

Changes in 2020 vs 2022 2 missing 1 changed

Flip API Versions →

Missing in 2020 (only available in 2022)

GetBarModelDiameter GetBarNominalDiameter

Changed members

RebarUpdateCurvesData.GetBarDiameter()
Became obsolete in 2022: This method is deprecated in Revit 2022 and may be removed in a later version of Revit. It returns the bar model diameter. We suggest you replace it with GetBarModelDiameter or GetBarNominalDiameter methods instead.
→ returns Double Returns the model diameter of the Rebar.

Changes in 2021 vs 2022 2 missing 1 changed

Flip API Versions →

Missing in 2021 (only available in 2022)

GetBarModelDiameter GetBarNominalDiameter

Changed members

RebarUpdateCurvesData.GetBarDiameter()
Became obsolete in 2022: This method is deprecated in Revit 2022 and may be removed in a later version of Revit. It returns the bar model diameter. We suggest you replace it with GetBarModelDiameter or GetBarNominalDiameter methods instead.
→ returns Double Returns the model diameter of the Rebar.

Changes in 2026 vs 2022 9 added 1 missing 4 changed

Flip API Versions →

Added in 2026 (new since 2022)

GetCycleCounter GetTerminationPlaneNormalForBarIdx(Int32, Int32) GetTerminationRotationAngle(Int32) SetCycleCounter(Int32) SetTerminationPlaneNormalForBarIdx(Int32, Int32, XYZ) SetTerminationRotationAngle(Int32, Double) AlignedFreeFormSetOrientationOptions AreOrientationOptionsChanged CycleCounterChanged

Missing in 2026 (only available in 2022)

GetBarDiameter

Changed members

RebarUpdateCurvesData.GetHookOrientationAngle(Int32)
No longer obsolete in 2022 (was obsolete in 2026)
end Int32 The end of bar. Should be 0 for start or 1 for end.
→ returns Double The hook orientation angle at end that is currently in the rebar.
RebarUpdateCurvesData.GetHookPlaneNormalForBarIdx(Int32, Int32)
No longer obsolete in 2022 (was obsolete in 2026)
end Int32 The end of bar. Should be 0 for start or 1 for end.
barPositionIndex Int32 An index between 0 and (GetNumberOfBars()-1).
→ returns XYZ The normal of plane in which the hook at end of bar with index barPositionIndex that is currently in Rebar.
RebarUpdateCurvesData.SetHookOrientationAngle(Int32, Double)
No longer obsolete in 2022 (was obsolete in 2026)
end Int32 The end of bar. Should be 0 for start or 1 for end.
angle Double The hook orientation angle at end.
RebarUpdateCurvesData.SetHookPlaneNormalForBarIdx(Int32, Int32, XYZ, XYZ)
No longer obsolete in 2022 (was obsolete in 2026)
end Int32 The end of bar. Should be 0 for start or 1 for end.
barPositionIndex Int32 Index of the bar for which it will set hook plane normal.
hookNormal XYZ The normal of plane in which the hook at end of bar with index barPositionIndex will stay.
terminationPlaneNormal XYZ The plane's normal in which the termination at end of bar with index barPositionIndex will stay. The normal will be used for both hook and crank.

Changes in 2027 vs 2022 11 added 5 missing

Flip API Versions →

Added in 2027 (new since 2022)

GetCycleCounter GetTerminationPlaneNormalForBarIdx(Int32, Int32) GetTerminationRotationAngle(Int32) SetCycleCounter(Int32) SetTerminationPlaneNormalForBarIdx(Int32, Int32, XYZ) SetTerminationRotationAngle(Int32, Double) AlignedFreeFormSetOrientationOptions CycleCounterChanged EndConstraintLostTargets IsCustomSpacingFormulaChanged StartConstraintLostTargets

Missing in 2027 (only available in 2022)

GetBarDiameter GetHookOrientationAngle(Int32) GetHookPlaneNormalForBarIdx(Int32, Int32) SetHookOrientationAngle(Int32, Double) SetHookPlaneNormalForBarIdx(Int32, Int32, XYZ)