WallFailures Properties

Name	Return Type	Description
P CannotChangeSubwall	FailureDefinitionId	Changing the type of a subwall is not allowed. Edit the stacked wall type instead.
P CannotChangeTypeOfOldCurtainPanel	FailureDefinitionId	Cannot change the type of curtain panels in walls created with early versions of Revit. To change the panels of this curtain wall, wall must be recreated.
P CannotMaintainKeyReference	FailureDefinitionId	Can't maintain the position of the Location Line in this Wall.
P CannotMirrorWallPanel	FailureDefinitionId	Cannot mirror wall panels.
P CannotRedoFaceBased	FailureDefinitionId	Faces defining this Element cannot be reacquired.
P CannotRedoFaceBasedWarn	FailureDefinitionId	Faces defining this Element cannot be reacquired.
P CannotRedoFaceRoof	FailureDefinitionId	"Faces defining this Roof cannot be reacquired. Either delete the Roof or leave as it is.
P CannotRedoFaceToposolid	FailureDefinitionId	"Faces defining this Roof cannot be reacquired. Either delete the Roof or leave as it is.
P CannotSlantStackedWallError	FailureDefinitionId	Cannot slant a stacked wall with rectangular openings. Please delete the openings first.
P CannotSplitJoinHostsInplaceFamilies	FailureDefinitionId	Can't split/join this host because there are instances of In-place Families that cut openings into it. Edit or delete instances first so they don't cut into the host to be split or joined.
P CannotSplitVerticallyCompoundWall	FailureDefinitionId	Can't divide Wall's face to assign different materials to a vertically compound Wall.
P CannotToSplitWallPanels	FailureDefinitionId	Unable to split wall panel(s).
P CannotUpdateWallPanel	FailureDefinitionId	Unable to update wall panel.
P ChangingWallsweepType	FailureDefinitionId	This wall sweep instance has different profile or material than its type. You may delete the sweep, or if you ignore this warning, it will be regenerated according to its type.
P ConstrainedToWall	FailureDefinitionId	Sketch Lines created with Pick Wall must remain parallel to the Wall.
P ConstrainedToWallError	FailureDefinitionId	Sketch Lines created with Pick Wall must remain parallel to the Wall.
P ContFootingCannotJoin	FailureDefinitionId	Miter plane for Wall Foundation join is too far away; Bisecting plane will be used instead.
P ContFootingRadiusTooSmall	FailureDefinitionId	Can't display the Wall Foundation, because the Wall's radius is too small. Please increase the radius to display the Wall Foundation.
P CurtainOrStackedWallDisallowedForCrossSectionType	FailureDefinitionId	Curtain wall types and Stacked wall types are not allowed for this wall's cross-section type.
P DisallowedPathCurve	FailureDefinitionId	Cannot create stacked elliptical wall with offsets.
P EmbeddedButShouldNotBe	FailureDefinitionId	Conditions for wall embedding are no longer satisfied.
P ExtrudedWallDisallowedForCrossSectionType	FailureDefinitionId	Edited profiles are not allowed for this wall's cross-section type.
P FaceBecameVertical	FailureDefinitionId	Face defining this non-vertical Wall is vertical.
P FaceIsNoGoodForWall	FailureDefinitionId	Defining face is not suitable for walls.
P FaceIsNoLongerVertical	FailureDefinitionId	Face defining this vertical Wall is no longer vertical.
P FaceWallBadType	FailureDefinitionId	Wall type '[Type Name]' is incompatible with picked face. Only basic wall types are accepted.
P FaceWallComplexType	FailureDefinitionId	Vertically compound wall type features sweeps, reveals, or split layers are not supported on non-vertical face. Consider using a simplified type.
P FaceWallFailedToMake	FailureDefinitionId	Can't make Face Wall shape.
P FaceWallMissingFace	FailureDefinitionId	No picked face found.
P FailedConvertWallToPanel	FailureDefinitionId	Unable to convert wall to panel.
P FailedToChangeInstSymbol	FailureDefinitionId	Failed to change symbol of instance.
P FailedToStoreSideFace	FailureDefinitionId	Failed to store wall side face. Wall sweeps on this wall will fail to regenerate.
P InvalidBaseConstraintForLevel	FailureDefinitionId	Base Constraint is invalid for the Level.
P InvalidCompoundStructure	FailureDefinitionId	Invalid compound structure.
P InvalidTargetPosition	FailureDefinitionId	Joining the highlighted wall to the highlighted element moves the wall's top below its bottom or its bottom above its top, or interferes with wall joins or holes in the wall.
P InvalidTargetPositionError	FailureDefinitionId	Joining the highlighted wall to the highlighted element moves the wall's top below its bottom or its bottom above its top, or interferes with wall joins or holes in the wall.
P InvalidTopConstraintForLevel	FailureDefinitionId	Top Constraint is invalid for the Level.
P LostEditsJoinsRedoFaceBased	FailureDefinitionId	Previous edits and /or wall joins will not be preserved on this operation.
P ParameterChangeNotAffectingGeometry	FailureDefinitionId	Changing this element's parameter has no effect on its current position or geometry. Check to see if the element is constrained either in the project view or in the element's sketch.
P RecursionParameterIgnored	FailureDefinitionId	Parameter-defined type of curtain panels defined in a circular way and will be ignored.
P RemapConstrainLocationLine	FailureDefinitionId	Existing locked constraints to the Location Line will be transferred to the new Location Line position. Press "Unconstrain" to remove the constraint rather than transferring it.
P ShorterThanMinWall	FailureDefinitionId	Wall is shorter than minimum height allowed by its type.\nIt is [Length] and must be at least [Length].
P ShorterThanMinWallError	FailureDefinitionId	Wall is shorter than minimum height allowed by its type.\nIt is [Length] and must be at least [Length].
P ShorterThanMinWallFailure	FailureDefinitionId	Wall is shorter than minimum height allowed by its type.\nIt is [Length] and must be at least [Length].
P ShouldAdjustWallParameters	FailureDefinitionId	The best way to control top and base of the Wall is to modify the Constraints and Offset Parameters in Properties dialog.
P StackedWallNeedsUnjoin	FailureDefinitionId	A subwall of this stacked wall is unjoined from its neighbors because it was pulled too far.
P SubwallOfStackedWallDeleted	FailureDefinitionId	This stacked wall will be deleted because a subwall could not be created.
P TaperedWallAnglesControlledByType	FailureDefinitionId	Cannot set angles on a tapered wall which has angles controlled by the type.
P TooShortStackedWall	FailureDefinitionId	Stacked wall instance is too short.
P UnableToCreateWallForPanel	FailureDefinitionId	Unable to create wall for curtain wall panel.
P UnableToDeleteWallForPanel	FailureDefinitionId	Unable to delete curtain panel wall.
P UnjoinOnEditWallChange	FailureDefinitionId	Line associated with a joined face has been moved. This action will cause the other walls to become disjoined from this face. [Description]
P VerticalLayerExtensionFailure	FailureDefinitionId	Cannot extend layer(s) of the highlighted vertically compound wall.
P VerticalLayerExtensionFailureError	FailureDefinitionId	Cannot extend layer(s) of the highlighted vertically compound wall.
P WallCutoutForInsertionFailure	FailureDefinitionId	Can't cut wall for inserted objects
P WallLacksCurve	FailureDefinitionId	Wall does not have both a curve driver and a curve!!!!
P WallNegativeHeight	FailureDefinitionId	The top of the Wall is lower than the base of the Wall.
P WallSettingsChanged	FailureDefinitionId	Default wall settings will be changed (Base Constraint: [Base Level], Base Offset: [Base Offset], Top Constraint: [Top Level], Top Offset: [Top Offset])
P WallTypeIncompatibleWithTapered	FailureDefinitionId	This wall's type is not compatible with the Tapered cross-section. Tapered walls require a variable thickness layer.