ElectricalSystem

Description:
Provides access to the Electrical System in Autodesk Revit MEP.

Remarks:
The Electrical System object can only be queried in Autodesk Revit MEP.

Inheritance Hierarchy:
System.Object
  Autodesk.Revit.DB.Element
    Autodesk.Revit.DB.MEPSystem
      Autodesk.Revit.DB.Electrical.ElectricalSystem

public class ElectricalSystem : MEPSystem

Public Class ElectricalSystem _
	Inherits MEPSystem

public ref class ElectricalSystem : public MEPSystem

Name	Return Type	Description	Inherited From
M AddToCircuit(ElementSet)	nullNothingnullptr	Add a set of exist components to the Electrical System.
M Create(Connector, ElectricalSystemType)	nullNothingnullptr	Creates a new MEP Electrical System element from an unused Connector.
M Create(Document, IList<ElementId>, ElectricalSystemType)	nullNothingnullptr	Creates a new MEP Electrical System element from a set of electrical components.
M DisconnectPanel()	None	Disconnect the panel for the Electrical System.
M GetCircuitPath()	IList<XYZ>	Gets the list of the electrical system circuit path node position.
M IsCircuitPathValid(IList<XYZ>)	bool	Checks whether the list of the electrical system circuit path node position is valid.
M NewWires(View, WiringType)	New created wires	Create a bunch of wires for the electrical system.
M RemoveFromCircuit(ElementSet)	None	remove a set of exist components from the Electrical System.
M SelectPanel(FamilyInstance)	None	Set the panel for the Electrical System.
M SetCircuitPath(IList<XYZ>)	None	Sets the electrical system circuit path by the list of node position.
M ArePhasesModifiable()	bool	Returns true if the properties CreatedPhaseId and DemolishedPhaseId can be modified for this Element.	Element
M CanBeHidden(View)	bool	Indicates if the element can be hidden in the view.	Element
M CanBeLocked()	bool	Identifies if the element can be locked.	Element
M CanDeleteSubelement(Subelement)	bool	Checks if given subelement can be removed from the element.	Element
M CanHaveAnalyticalModel()	bool	Indicates whether the Element can have an Analytical Model.	Element
M CanHaveTypeAssigned()	bool	Identifies if the element can have a type assigned.	Element
M CanHaveTypeAssigned(Document, ICollection<ElementId>)	bool	Checks if all elements in the set can have a type assigned.	Element
M ChangeTypeId(Document, ICollection<ElementId>, ElementId)	IDictionary	Changes the type of all elements in the given set.	Element
M ChangeTypeId(ElementId)	ElementId	Changes the type of the element.	Element
M DeleteEntity(Schema)	bool	Deletes the existing entity created by %schema% in the element	Element
M DeleteSubelement(Subelement)	bool	Removes a subelement from the element.	Element
M DeleteSubelements(IList<Subelement>)	bool	Removes the subelements from the element.	Element
M Dispose()	None	Releases all resources used by the	Element
M GetAnalyticalModelId()	Element Id.	Retrieves the Element Id of the Analytical Model Element for this Element.	Element
M GetAnalyticalModel()	Writeable Analytical Model.	Retrieves writeable Analytical Model for Element.	Element
M GetChangeTypeAny()	ChangeType	Returns ChangeType associated with any change in an element.	Element
M GetChangeTypeElementAddition()	ChangeType	Returns ChangeType associated with element addition	Element
M GetChangeTypeElementDeletion()	ChangeType	Returns ChangeType associated with element deletion.	Element
M GetChangeTypeGeometry()	ChangeType	Returns ChangeType associated with a change in the geometry of an element	Element
M GetChangeTypeParameter(ElementId)	ChangeType	Returns ChangeType associated with a change in a parameter's value	Element
M GetChangeTypeParameter(Parameter)	ChangeType	Returns ChangeType associated with a change in a parameter's value	Element
M GetDependentElements(ElementFilter)	IList<ElementId>	Get all elements that, from a logical point of view, are the children of this Element.	Element
M GetEntity(Schema)	The returned Entity.	Returns the existing entity corresponding to the Schema if it has been saved in the Element, or an invalid entity otherwise.	Element
M GetEntitySchemaGuids()	IList<Guid>	Returns the Schema guids of any Entities stored in this element.	Element
M GetExternalFileReference()	ExternalFileReference	Gets information pertaining to the external file referenced by the element.	Element
M GetExternalResourceReference(ExternalResourceType)	ExternalResourceReference	Gets the ExternalResourceReference associated with a specified external resource type.	Element
M GetExternalResourceReferences()	IDictionary	Gets the full map of the external resource references referenced by the element.	Element
M GetGeneratingElementIds(GeometryObject)	ICollection<ElementId>	Returns the ids of the element(s) that generated the input geometry object.	Element
M GetGeometryObjectFromReference(Reference)	GeometryObject	Retrieve one geometric primitive contained in the element given a reference.	Element
M GetMaterialArea(ElementId, Boolean)	double	Gets the area of the material with the given id.	Element
M GetMaterialIds(Boolean)	ICollection<ElementId>	Gets the element ids of all materials present in the element.	Element
M GetMaterialVolume(ElementId)	double	Gets the volume of the material with the given id.	Element
M GetMonitoredLinkElementIds()	IList<ElementId>	Provides the link instance IDs when the element is monitoring.	Element
M GetMonitoredLocalElementIds()	IList<ElementId>	Provides the local element IDs when the element is monitoring.	Element
M GetOrderedParameters()	IList<Parameter>	Gets the parameters associated to the element in order.	Element
M GetParameterFormatOptions(ElementId)	FormatOptions	Returns a FormatOptions override for the element Parameter, or a default FormatOptions if no override exists.	Element
M GetParameters(String)	IList<Parameter>	Retrieves the parameters from the element via the given name.	Element
M GetPhaseStatus(ElementId)	ElementOnPhaseStatus	Gets the status of a given element in the input phase	Element
M GetSubelements()	IList<Subelement>	Returns the collection of element subelements.	Element
M GetTypeId()	ElementId	Returns the identifier of this element's type.	Element
M GetValidTypes()	ICollection<ElementId>	Obtains a set of types that are valid for this element.	Element
M GetValidTypes(Document, ICollection<ElementId>)	ICollection<ElementId>	Obtains a set of types that are valid for all given elements.	Element
M HasPhases()	bool	Returns true if this Element has the properties CreatedPhaseId and DemolishedPhaseId.	Element
M IsExternalFileReference()	bool	Determines whether this Element represents an external file.	Element
M IsHidden(View)	bool	Identifies if the element has been permanently hidden in the view.	Element
M IsMonitoringLinkElement()	bool	Indicate whether an element is monitoring any elements in any linked models.	Element
M IsMonitoringLocalElement()	bool	Indicate whether an element is monitoring other local elements.	Element
M IsPhaseCreatedValid(ElementId)	bool	Returns true if createdPhaseId is an allowed value for the property CreatedPhaseId in this Element.	Element
M IsPhaseDemolishedValid(ElementId)	bool	Returns true if demolishedPhaseId is an allowed value for the property DemolishedPhaseId in this Element.	Element
M IsValidType(Document, ICollection<ElementId>, ElementId)	bool	Checks if given type is valid for the set of elements.	Element
M IsValidType(ElementId)	bool	Checks if given type is valid for this element.	Element
M LookupParameter(String)	nullNothingnullptr	Attempts to find a parameter on the element which has the given name.	Element
M RefersToExternalResourceReference(ExternalResourceType)	bool	Determines whether this Element uses external resources associated with a specified external resource type.	Element
M RefersToExternalResourceReferences()	bool	Determines whether this Element uses external resources.	Element
M SetEntity(Entity)	None	Stores the entity in the element. If an Entity described by the same Schema already exists, it is overwritten.	Element
M Add(ConnectorSet)	None	Add elements into the system and connect them with the system using given connectors.	MEPSystem
M DivideSystem(Document)	ICollection<ElementId>	Divide the phyisical networks in the system and create a new system for each network.	MEPSystem
M GetCriticalPathSectionNumbers()	The section numbers.	Obtains a list of the critical path section numbers.	MEPSystem
M GetPhysicalNetworksNumber()	int	Get the physical networks number in the system.	MEPSystem
M GetSectionByIndex(Int32)	The section.	Get the section from the index.	MEPSystem
M GetSectionByNumber(Int32)	nullNothingnullptr	Get the Section from section number	MEPSystem
M IsSystemDividable()	bool	Checks if the system is dividable. The system is dividable if there is more than one physical network in the system. Currently, only HVAC and piping systems support dividing.	MEPSystem
M Remove(ConnectorSet)	None	Removes connectors from system.	MEPSystem
M Remove(ICollection<ElementId>)	None	Remove elements from system.	MEPSystem

Name	Return Type	Description	Inherited From
P ApparentCurrentPhaseA	double	The ApparentCurrentPhaseA value of the Electrical System.
P ApparentCurrentPhaseB	double	The ApparentCurrentPhaseB value of the Electrical System.
P ApparentCurrentPhaseC	double	The ApparentCurrentPhaseC value of the Electrical System.
P ApparentCurrent	double	The ApparentCurrent value of the Electrical System.
P ApparentLoadPhaseA	double	The ApparentLoadPhaseA value of the Electrical System.
P ApparentLoadPhaseB	double	The ApparentLoadPhaseB value of the Electrical System.
P ApparentLoadPhaseC	double	The ApparentLoadPhaseC value of the Electrical System.
P ApparentLoad	double	The ApparentLoad value of the Electrical System.
P BalancedLoad	bool	Reports whether the BalancedLoad is on or off.
P CircuitConnectionType	CircuitConnectionType	The circuit connection type of the electrical system.
P CircuitNumber	string	The CircuitNumber of the Electrical System.
P CircuitPathMode	ElectricalCircuitPathMode	The circuit path mode of the electrical system.
P CircuitType	CircuitType	The circuit type of the Electrical System.
P GroundConductorsNumber	int	The GroundConductors Number of the Electrical System.
P HasCustomCircuitPath	bool	Checks whether the electrical system circuit path has been customized. If not, the property CircuitPathMode cannot be set as Custom explicitly.
P HasPathOffset	bool	Whether the circuit path has a valid offset.
P HotConductorsNumber	int	The HotConductors Number of the Electrical System.
P IsBasePanelFeedThroughLugsOccupied	bool	Checks if the feed through lugs of the base panel is already occupied.
P Length	double	The Length value of the Electrical System.
P LoadClassifications	string	The LoadClassifications used in the Electrical System.
P LoadName	string	The LoadName of the Electrical System.
P NeutralConductorsNumber	int	The NeutralConductors Number of the Electrical System.
P PanelName	string	The Panel name of the Electrical System.
P PathOffset	double	The offset of the horizontal segments of the circuit path.
P PolesNumber	int	The Poles Number of the Electrical System.
P PowerFactor	double	The PowerFactor value of the Electrical System.
P PowerFactorState	PowerFactorStateType	The PowerFactorState type of the Electrical System.
P Rating	double	The Rating value of the Electrical System.
P RunsNumber	int	The Runs Number of the Electrical System.
P StartSlot	int	The Start Slot where the Electrical System is located in its panel.
P SystemType	ElectricalSystemType	The Electrical System Type of the Electrical System.
P TrueCurrentPhaseA	double	The TrueCurrentPhaseA value of the Electrical System.
P TrueCurrentPhaseB	double	The TrueCurrentPhaseB value of the Electrical System.
P TrueCurrentPhaseC	double	The TrueCurrentPhaseC value of the Electrical System.
P TrueCurrent	double	The TrueCurrent value of the Electrical System.
P TrueLoadPhaseA	double	The TrueLoadPhaseA value of the Electrical System.
P TrueLoadPhaseB	double	The TrueLoadPhaseB value of the Electrical System.
P TrueLoadPhaseC	double	The TrueLoadPhaseC value of the Electrical System.
P TrueLoad	double	The TrueLoad value of the Electrical System.
P VoltageDrop	double	The VoltageDrop value of the Electrical System.
P Voltage	double	The Voltage value of the Electrical System.
P WireSizeString	string	The WireSize as a String of the Electrical System
P WireType	WireType	The wire type of the Electrical System.
P AssemblyInstanceId	ElementId	The id of the assembly instance to which the element belongs.	Element
P BoundingBox	BoundingBoxXYZ	Retrieves a box that circumscribes all geometry of the element.	Element
P Category	Category	Retrieves a Category object that represents the category or sub category in which the element resides.	Element
P CreatedPhaseId	ElementId	Id of a Phase at which the Element was created.	Element
P DemolishedPhaseId	ElementId	Id of a Phase at which the Element was demolished.	Element
P DesignOption	DesignOption	Returns the design option to which the element belongs.	Element
P Document	Document	Returns the Document in which the Element resides.	Element
P Geometry	GeometryElement	Retrieves the geometric representation of the element.	Element
P GroupId	ElementId	The id of the group to which an element belongs.	Element
P Id	ElementId	A unique identifier for an Element in an Autodesk Revit project.	Element
P IsTransient	bool	Indicates whether an element is transient or permanent.	Element
P IsValidObject	bool	Specifies whether the .NET object represents a valid Revit entity.	Element
P LevelId	ElementId	The id of the level associated with the element.	Element
P Location	Location	This property is used to find the physical location of an element within a project.	Element
P Name	string	A human readable name for the Element.	Element
P OwnerViewId	ElementId	The id of the view that owns the element.	Element
P Parameter	Parameter	Retrieves a parameter from the element given a parameter id.	Element
P Parameter	Parameter	Retrieves a parameter from the element based on its definition.	Element
P Parameter	Parameter	Retrieves a parameter from the element given a GUID for a shared parameter.	Element
P ParametersMap	ParameterMap	Retrieves a map containing all of the parameters that are contained within the element.	Element
P Parameters	ParameterSet	Retrieves a set containing all of the parameters that are contained within the element.	Element
P Pinned	bool	Identifies if the element has been pinned to prevent changes.	Element
P UniqueId	string	A stable unique identifier for an element within the document.	Element
P ViewSpecific	bool	Identifies if the element is owned by a view.	Element
P WorksetId	WorksetId	Get Id of the Workset which owns the element.	Element
P BaseEquipmentConnector	nullNothingnullptr	The connector within base equipment which is used to connect with system.	MEPSystem
P BaseEquipment	FamilyInstance	The base panel or equipment of the system.	MEPSystem
P ConnectorManager	ConnectorManager	Connector manager of the system.	MEPSystem
P Elements	ElementSet	Terminal elements in the system.	MEPSystem
P HasDesignParts	bool	Indicates if the system has one or more design parts.	MEPSystem
P HasFabricationParts	bool	Indicates if the system has one or more fabrication parts.	MEPSystem
P HasPlaceholders	bool	Indicates if the system has one or more placeholders.	MEPSystem
P IsEmpty	bool	Indicates if the system is empty or not.	MEPSystem
P IsMultipleNetwork	bool	Indicates if the system is well connected or not. The flag will enable the "Divide System" button.	MEPSystem
P IsValid	bool	Indicates if the system is valid or not. atom AtomValidateSystem default false	MEPSystem
P PressureLossOfCriticalPath	double	The total pressure loss of the sections in critical path.	MEPSystem
P SectionsCount	int	The number of sections.	MEPSystem