Sign in
2020 Enumeration
Changes 7
E

PostableCommand

Description:
Enumerates all of the built-in commands which can be posted by an API application. 
public enum PostableCommand
Name Description
E RoofByFace Creates a roof using a non-vertical face of a mass.
E Soffit Creates a roof soffit in the building model.
E RepeatComponent Repeats the selected applied component along a divide path or surface.
E ViewList Creates a schedule of the views in the project.
E LinearDimensionTypes Defines attributes for linear (horizontal and vertical) dimensions.
E AngularDimensionTypes Defines attributes for angular dimensions.
E SplitElement Cuts an element (such as a wall or line) at a selected point, or removes a segment between 2 points.
E SpotElevation Displays the elevation of a selected point.
E SpotCoordinate Displays the North/South and East/West coordinates of points in a project.
E RoofByFootprint Creates a roof using the building footprint to define its boundaries.
E RoofByExtrusion Creates a roof by extruding a profile that you sketch.
E RadialDimensionTypes Defines attributes for radial dimensions.
E ReloadLatest Loads updates from the central model to your local copy of the project.
E Render Creates a photorealistic image of a building model.
E ShowHistory Displays a list of all the times a workshared file (the central model or a local copy of the central model) was saved and who saved it.
E SplitSurface Splits a toposurface into 2 distinct surfaces, so that each can be edited independently.
E DrawOnFace Draws lines on existing surfaces.
E DrawOnWorkPlane Draws lines on the active work plane.
E GrayInactiveWorksets Displays elements in inactive worksets as gray to visually distinguish them from elements in active worksets.
E ImportGBXML Imports analysis data from a gbXML file.
E ExportReportsRoomOrAreaReport Saves a schedule or Room/Area report.
E SheetIssuesOrRevisions Specifies revision information for the project.
E RevisionSchedule Adds a revision schedule to a custom title block.
E CalloutTags Specifies the callout head for callout tags, and the radius of the callout bubble.
E ElevationTags Defines properties for elevation tags.
E SectionTags Specifies the shape of heads and tails for section tags.
E FloorByFaceFloor Converts a mass floor into a floor of the building model.
E HideCategory Hides all elements that belong to a selected category in the current view.
E RunInterferenceCheck Locates invalid intersections between elements in a project.
E SpecifyCoordinatesAtPoint Relocates a project and rotates the project to True North by specifying coordinates for North/South, East/West, and Elevation.
E ExportIFC Saves an IFC file.
E SystemBrowser System.Windows.Controls.StackPanel
E PublishDWGToAutodeskBuzzsaw Saves selected views and sheets as DWG files and posts them to a Autodesk Buzzsaw site.
E PublishDWFToAutodeskBuzzsaw Saves selected views and sheets as DWF files and posts them to a Autodesk Buzzsaw site.
E PublishDXFToAutodeskBuzzsaw Saves selected views and sheets as DXF files and posts them to a Autodesk Buzzsaw site.
E PublishDGNToAutodeskBuzzsaw Saves selected views and sheets as DGN files and posts them to a Autodesk Buzzsaw site.
E ResetAnalyticalModel Resets the analytical model alignment methods to Auto-detect.
E PublishSATToAutodeskBuzzsaw Saves selected views and sheets as SAT files and posts them to a Autodesk Buzzsaw site.
E ExportOptionsIFCOptions Sets export options for CAD and IFC.
E TypeProperties Displays properties for the family type to which the selected element belongs.
E ExportDWFOrDWFx Creates DWF or DWFx files.
E ExportCADFormatsDWG Creates DWG, DXF, DGN, or SAT files.
E ExportCADFormatsDXF Creates DWG, DXF, DGN, or SAT files.
E ExportCADFormatsDGN Creates DWG, DXF, DGN, or SAT files.
E ExportCADFormatsACIS_SAT Creates DWG, DXF, DGN, or SAT files.
E RelinquishAllMine Releases ownership of worksets and borrowed elements that have not been changed.
E MaterialTakeoff Creates a list of the sub-components or materials of any Revit family category.
E DWFMarkup Links marked-up DWF files into a Revit project so you can see the markups on corresponding sheets.
E ImportTypes Imports family types from a text (.txt) file into the current family.
E ExportExportTypes Exports family types from the current family to a text (.txt) file.
E CheckMemberSupports Verifies that structural elements such as beams, columns, walls, and slabs, are joined to supporting elements.
E AnalyticalConsistencyChecks Verifies the analytical and physical model for consistency.
E KeynoteLegend Creates a list of the keynotes used in a project, and their definitions.
E KeynotingSettings Specifies the location of the keynote table and the numbering method for keynotes.
E OpenBuildingComponent Opens a building component Autodesk Exchange (ADSK) file.
E Web Draws the web elements between the chords.
E TopChord Draws the top chord of the truss family.
E BottomChord Draws the bottom chord of the truss family.
E TogglePropertiesPalette Displays or hides a palette where you can view and edit instance properties.
E StatusBarWorksets For a workshared project, displays the active workset and the number of Others' pending Editing Requests in the status bar.
E StatusBarDesignOptions Displays the active design option in the status bar.
E ReinforcementNumbers Defines or edits numbering sequences by partition for rebar and fabric sheets.
E FamilyCategoryAndParameters Assigns the properties of a predefined family category to the component you are creating.
E ExportImagesandAnimationsWalkthrough Saves animations or image files.
E ExportImagesandAnimationsSolarStudy Saves animations or image files.
E SunSettings Specifies the location of the sun in the sun path, solar studies, walkthroughs, and rendered images.
E Grid Places column grid lines in the building design.
E ArchitecturalWall Creates a non-structural wall in the building model.
E Door Adds doors to the building model.
E Window Adds windows to the building model.
E Delete Removes selected elements from the building model.
E Space Places analytical spaces to account for the entire volume within the model. This includes rooms, plenums and chases.
E SpaceTag Labels spaces in a project.
E SpaceSeparator Draws a space separation line to divide space.
E Level Places a level in a view.
E FramingElevation Creates a framing elevation to show vertical bracing.
E ArchitecturalFloor Creates a floor for the current level of the building model.
E Stair Adds a stair to the building model by creating common run, landing, and support components.
E ArchitecturalColumn Adds architectural columns to the building model.
E MirrorProject Flips the position of a project around a selected axis.
E RotateProjectNorth Changes the relationship of all elements relative to Project North (the top of the drawing area) in plan views.
E Rotate Rotates selected elements around an axis.
E MirrorPickAxis Reverses the position of selected elements, using an existing line or edge as the mirror axis.
E LineWeights Creates or modifies line weights.
E ObjectStyles Specifies line weights, colors, and patterns, and materials for model objects, annotation objects, and imported objects.
E AnalysisDisplayStyles Specifies a presentation format for visualizing analysis results.
E Snaps Specifies snap increments, and enables or disables snap points.
E ProjectUnits Specifies the display format for units of measure.
E StructuralPlan Creates a structural plan view.
E FloorPlan Creates a floor plan view.
E Section Creates a section view.
E Camera Creates a 3D view from the perspective of a camera placed in the view.
E ProjectBrowser Displays the Project Browser.
E NewSheet Creates a page for a document set.
E ImportCAD Imports vector data from other CAD programs to the Revit project.
E LinkCAD Links a CAD file to the current Revit project.
E PointCloud Links a Point Cloud file (*.rcp or *.rcs) into the current project.
E NewFamilyFile Create a new family
E LoadShapes Loads a Revit family into the current file.
E NewConceptualMass Opens a template for creating a conceptual massing model.
E Pin Locks a model element in place.
E Unpin Unlocks a model element so it can move.
E SolidExtrusion Creates a 3D solid by extruding a 2D shape (profile).
E PlaceAComponent Places an element in the building model, based on a selected element type.
E ModelLine Creates a line that exists in 3D space and is visible in all views of a project.
E StairPath Annotates the slope direction and walk line of a stair.
E ReferencePlane Creates a reference plane using drawing tools.
E Redo Redo last undone action
E Undo Undo last action
E Control Adds a flip arrow to the view.
E Filters Creates a filter to modify the visibility and graphics of elements in views based on element parameters.
E TemporaryDimensions Specifies the placement and component references for temporary dimensions.
E LinePatterns Creates or modifies line patterns.
E Array Creates a linear or radial array of selected elements.
E Move Moves selected elements to the specified location in the current view.
E Copy Copies selected elements and places them in the specified location in the current view.
E PlaceView Adds a view to a sheet.
E Text Adds text annotations (notes) to the current view.
E NewTitleBlock Opens a template for creating a Title Block family.
E AutomaticCeiling Creates a ceiling at a specified distance above the level in which it resides.
E FillPatterns Creates or modifies drafting patterns and model patterns.
E Default3DView Opens the default orthographic 3D view.
E Label Creates a label for the annotation symbol.
E VisibilityOrGraphics Controls the visibility and graphic display of model elements, annotations, imported and linked elements, and workset elements in a view.
E ViewRange Controls the view range of a plan.
E Opening Creates an opening in a host, such as a wall or ceiling.
E NewRevitFile Create a new project
E ActivateView Enables you to modify the selected view without leaving the sheet.
E Materials Specifies the materials and associated properties to apply to elements in the building model.
E DeactivateView Deactivates the view, so you can no longer change the view from the sheet.
E MaterialAssets Modifies the assets that define a material.
E DecalTypes Creates a decal that you can use to place images on surfaces of a building model for rendering.
E Options Options.
E Room Creates a room bounded by model elements (such as walls, floors, and ceilings) and separation lines.
E CurtainGrid Creates a grid line in a curtain wall or curtain system.
E CurtainWallMullion Creates a horizontal or vertical mullion on a curtain grid.
E FamilyTypes Allows you to enter parameter values for existing family types, add parameters to the family, or create new types within the family.
E FilledRegion Creates a 2D, view-specific graphic with a fill pattern and a boundary line.
E RoomTag Tags the selected room.
E Align Aligns one or more elements with a selected element.
E Symbol Places a 2D annotation drawing symbol in the current view.
E DuplicateView Creates a view that contains only the model geometry from the current view.
E ExportOptionsExportSetupsDGN Sets export options for CAD and IFC.
E ExportOptionsExportSetupsDWGOrDXF Sets export options for CAD and IFC.
E ColorFillLegend Places a legend in a view to indicate the meanings of color fills for rooms or areas.
E BuildingElevation Creates an elevation view.
E JoinOrUnjoinRoof Connects roofs to other roofs or walls, or reverses a previous join.
E SolidBlend Creates a solid 3D shape that changes along its length, blending from a starting shape to an ending shape.
E ManageLinks Provides options for managing links to building models, CAD files, DWF markup files, and point clouds.
E SolidRevolve Creates a 3D shape by sweeping a 2D profile around an axis.
E ScheduleOrQuantities Creates a key schedule or a schedule of building components.
E Callout Creates a rectangular callout in the view.
E SolidSweep Creates a 3D shape by sweeping a 2D profile along a path.
E CreateGroup Creates a group of elements for easy reuse.
E Ramp Adds a ramp to the building model.
E RoomSeparator Creates a separation line to bound rooms where no walls or other room-bounding elements exist.
E AlignedToCurrentView Pastes elements that were cut or copied from another view into the current view.
E AlignedToPickedLevel Pastes the selected elements into a elevation view or a section view.
E WallJoins Changes how walls join together (butt, miter, square off).
E StartingView Specifies the view that first displays when you open the model.
E AlignedToSelectedLevels Pastes multiple elements from one level to specified levels.
E TagByCategory Attaches a tag to an element based on the element category.
E AlignedToSelectedViews Pastes selected elements, including view-specific elements such as dimensions, into specified views.
E LoadedTagsAndSymbols Lists the tags and symbols that will be used for each element category.
E NewAnnotationSymbol Creates a tag or symbol to identify elements in the project.
E AlignedToSamePlace Pastes the elements to the same place from which they were cut or copied.
E SpotSlopeTypes Defines attributes for spot slopes.
E Arrowheads Specifies line weights, fills, and styles for annotation arrowheads.
E SpotElevationTypes Defines attributes for spot elevations.
E SpotCoordinateTypes Defines attributes for spot coordinates.
E ReviewWarnings Displays a list of messages that you can ignore or resolve.
E LineStyles Creates or modifies line styles.
E ReflectedCeilingPlan Creates a reflected ceiling plan view.
E DetailLevel Specifies the detail level (coarse, medium, or fine) that applies to each view scale by default.
E VoidExtrusion Creates a 3D shape that is then used to remove part of a solid 3D shape.
E VoidBlend Creates a 3D blend, which is then used to remove part of a solid 3D shape.
E VoidRevolve Creates a 3D shape by sweeping a 2D profile around an axis, and uses the 3D shape to remove part of a solid 3D shape.
E VoidSweep Creates a 3D shape by sweeping a 2D profile along a path, and uses the resulting 3D shape to remove part of a solid 3D shape.
E CutGeometry Selects the geometry to cut.
E UncutGeometry Selects which geometry does not get cut when you join geometry.
E PlaceDetailGroup Places an instance of a detail group in the view.
E OverrideByCategory Changes the graphic display settings for all elements that belong to the same category as the selected element in the current view.
E DetailComponent Adds a view-specific detail component to a view.
E DetailLine Creates view-specific lines.
E Insulation Places a batt insulation graphic in a detail view.
E CreateSimilar Places an element of the same type as the selected element
E Worksets Creates worksets and adds elements to them.
E Phases Specifies project phases, phase filters, and graphic overrides for phases.
E PropertyLine Creates a property line in a plan view.
E BuildingPad Adds a building pad from a closed loop that you sketch on a toposurface.
E MatchTypeProperties Converts one or more elements to match the type of another element in the same view.
E ScopeBox Controls the visibility of datum elements (grids, levels, and reference lines) in specific views.
E Linework Overrides the line style for a selected line in the active view only.
E SetWorkPlane Specifies the work plane for the current view or for a selected work-plane–based element.
E DraftingView Creates a view showing details that are not directly associated with the building model.
E Legend Creates a list of building components and annotations used in a project.
E Demolish Marks elements as demolished in the current phase.
E RevisionCloud Adds a revision cloud to the current view or sheet to indicate design areas that have changed.
E SynchronizeAndModifySettings Allows you to specify options for the synchronization operation.
E ProjectInformation Specifies energy data, project status, and client information.
E ModelInPlace Creates a component that is unique to the project.
E SheetList Creates a schedule that lists the drawings in the project.
E AreaPlan Creates an area plan view.
E GradedRegion Modifies a toposurface to indicate changes during the construction process.
E Toposurface Defines a topographical surface in a site plan or a 3D view.
E ManageImages Lists all raster images used in the project.
E ApplyTemplatePropertiesToCurrentView Applies properties stored in a view template to the current view.
E RevealWall Extrudes a profile along a path to create a cutout in a wall.
E SweepWall Creates a wall sweep by extruding a profile along a path.
E Paint Applies a material to the face of an element.
E RemovePaint Removes paint from selected faces.
E NoteBlock Creates a schedule of annotations added using the Symbol tool.
E ModelText Adds 3D text to the building model.
E ShowHiddenLinesByElement Displays hidden lines for individual model elements and detail elements that are obscured by other elements in the current view.
E RemoveHiddenLinesByElement Removes hidden lines for model elements and detail elements that are obscured by other elements in the active view only.
E ManageViewTemplates Displays parameters for view templates in the project.
E CreateTemplateFromCurrentView Creates a view template using the properties of the current view as the basis for the new template.
E RestoreBackup Rolls back changes made to a workshared project, or saves a specific backup version as a new file.
E ExportODBCDatabase Saves model data to an ODBC database.
E LoadAsGroup Loads a Revit file as a group.
E SaveAsLibraryGroup Saves a copy of all loaded families, the selected family, group, or view to your library.
E ParkingComponent Adds parking spaces to a toposurface.
E TransferProjectStandards Copies selected project settings from another open project to the current project.
E SymbolicLine Creates lines that are meant for symbolic purposes only, and are not part of the actual geometry of the component or building model.
E CutProfile Changes the shape of elements that are cut in a view, such as roofs, walls, floors, and the layers of compound structures.
E ExportReportsSchedule Saves a schedule or Room/Area report.
E CloseInactiveViews Closes views that are not active.
E AreaTag Tags the selected area.
E AreaBoundary Defines boundaries for areas.
E Area Creates an area defined by walls and boundary lines.
E JoinGeometry Creates clean joins between 2 or more host elements that share a common face, such as walls and floors.
E UnjoinGeometry Removes a join between 2 or more elements.
E SwitchJoinOrder Changes the order in which elements join with one another.
E TagAllNotTagged Adds tags to multiple elements in one step.
E MergeSurfaces Combines 2 toposurfaces to create one toposurface.
E SharedParameters Specifies parameters that can be used in multiple families and projects.
E LegendComponent Adds a graphic representation of a selected model element to a legend view.
E Offset Copies or moves a selected element (such as a line, wall, or beam) a specified distance perpendicular to its length.
E PurgeUnused Removes unused families and types from a project.
E PlaceDecal Places an image on surfaces of a building model for rendering.
E RebarLine Defines lines and geometry of the rebar shape.
E LabelContours Displays the elevations of contour lines.
E SplitWithGap Splits a wall into 2 separate walls with a defined gap between them.
E ThinLines Displays all lines on screen as a single width, regardless of zoom level.
E LinkRevit Links another model to the current model.
E ExportImagesandAnimationsImage Saves animations or image files.
E ProjectParameters Specifies parameters that can be added to categories of elements in a project, and used in schedules.
E RelocateProject Moves the model relative to the shared coordinate system.
E RotateTrueNorth Changes the angle for a project relative to True North.
E DuplicateWithDetailing Creates a view that includes model geometry and view-specific elements from the current view.
E Location Specifies the geographic location for the project.
E AcquireCoordinates Determines the coordinates used in a linked project, and uses them for the current project.
E ReportSharedCoordinates Displays shared coordinates of a linked model within a host model.
E IdsOfSelection Displays unique identifiers for the selected elements.
E SelectById Uses an element’s unique identifier to locate and select the element in the current view.
E PublishCoordinates Determines the coordinates used in the current project, and uses them for a linked project.
E PlanRegion Creates a plan region within a view.
E BrowserOrganization Changes the way that views are listed in the Project Browser.
E Matchline Adds matchlines to indicate where a view is split.
E ViewReference Adds an annotation indicating the sheet number and detail number for a selected view.
E DesignOptions Creates and manages design option sets and individual design options for the project.
E AddToSet Moves selected elements from the main model to one or more design options in a set.
E PickToEdit Opens a design option for editing by selecting an element contained in the option.
E EditingRequests Displays a list of other users’ requests to borrow elements in your worksets, and your pending requests.
E SaveAsLibraryFamily Saves a copy of all loaded families, the selected family, group, or view to your library.
E Subregion Defines an area within a toposurface.
E Railing Creates a railing by sketching the railing path.
E Beam Adds individual beams, a chain of beams, or beams along grid lines.
E Brace Adds diagonal structural members connected to beams and columns.
E StructuralColumn Adds a vertical load-bearing element to the building model.
E StructuralWall Creates a load-bearing or shear wall in the building model.
E SpanDirectionSymbol Places a span direction symbol on a structural floor.
E StructuralFloor Creates a structural floor (slab) for the current level of the building model.
E Scale Resizes the selected item.
E Loads Applies point, line, and area loads to a model.
E StructuralSettings Defines settings for analytical elements and the display of structural framing.
E ReferenceLine Creates a reference line that you can use when creating a new mass, or to create constraints for the mass.
E RebarCoverSettings Adds, removes, or modifies the default rebar cover settings.
E ShowMassFormAndFloors Displays mass forms and any mass floors you have specified in all views.
E CurtainSystemByFace Creates a curtain system on the face of a mass or generic model.
E WallByFaceWall Creates walls using faces of a mass or generic model.
E ShowMassByViewSettings Displays masses based on the settings for the current view. By default, masses are turned off.
E ShowMassSurfaceTypes Displays mass faces, including any glazing and shades that have been specified.
E ShowMassZonesAndShades Displays mass zones, glazing, and shades if they have been specified.
E StructuralRebar Places planar or multi-planar rebar.
E UseCurrentProject Displays warnings for monitored elements in the current project.
E SelectLink Displays warnings for monitored elements between linked projects and the host project.
E Wall Creates foundations hosted by walls.
E Isolated Adds footings or pile caps to the building model.
E MaterialTag Tags a selected element using the description specified for its material.
E CoordinationSettings Specifies mapping behavior when copying MEP fixtures from a linked model into the current project.
E Slab Adds a foundation slab to the building model.
E ElementKeynote Tags a selected element using the keynote specified for the element type.
E MaterialKeynote Tags a selected element using the keynote specified for its material.
E UserKeynote Tags an element with a keynote that you select.
E LoadSelection Loads a previously saved selection set.
E SaveSelection Saves the currently selected elements as a set.
E EditSelection Edits a previously saved selection set.
E MultiCategoryTag Attaches tags to elements of multiple categories, based on a shared parameter.
E BoundaryConditions Defines point, line, and area boundary conditions in an analytical model.
E StructuralPathReinforcement Sketches the path of evenly placed reinforcing bars that are created perpendicular to the sketch.
E PathReinforcementSymbol Places a symbol that shows extents and hook types for the selected path reinforcement.
E OpeningByFace Creates an opening that is perpendicular to the selected face of a roof, floor, or ceiling.
E VerticalOpening Cuts a vertical opening through a roof, floor, or ceiling.
E DormerOpening Cuts a roof to create an opening for a dormer.
E WallOpening Cuts a rectangular opening in a straight or curved wall.
E ShaftOpening Creates a vertical opening that spans multiple levels, cutting through intervening roofs, floors, and ceilings.
E SpotSlope Displays the slope at a specific point on a face or an edge of a model element.
E HideElements Hides selected elements in the current view.
E OverrideByElement Changes the graphic display settings for selected elements in the current view.
E OverrideByFilter Changes the graphic display settings for all elements in the view that meet the criteria specified in a filter.
E DuplicateAsDependent Creates a view that is dependent on the original view.
E MaskingRegion Creates a graphic that obscures elements in a project or family.
E MajorSegment Identifies one segment of the rebar shape that maintains its general position in rotation and auto-expansion behaviors.
E ReinforcementSettings Customizes reinforcement settings such as rounding parameters, rebar hosting and abbreviations of area/path reinforcement tagging.
E ExportFBX Saves a 3D view as an FBX file.
E RecentFiles Displays a list of recently opened files, and provides access to important resources and links.
E OpenFamilyFile Open an existing family
E CreateParts Creates parts from the layers or subcomponents of a selected element.
E ViewCube Shows or hides the ViewCube, which allows you to change the orientation of a 3D view.
E BeamAnnotations Places multiple beam tags, annotations, and spot elevations.
E AllowableBarTypes Defines the allowable rebar types (diameters) of the shape type.
E MacroManager Opens the Macro Manager to run, create, or delete a macro.
E MacroSecurity Specifies the default security settings for macros in the Revit application or a document.
E NavigationBar Shows or hides the navigation bar, which provides access to the ViewCube, SteeringWheels, and zoom/pan functions.
E ExportBuildingSite Exports an ADSK exchange file.
E FormWorkPlaneView Enables the Workplane Viewer.
E ReconcileHosting Lists tags and elements hosted by the linked model that require review, due to changes in the linked model.
E SplitFace Divides the face of an element (such as a wall or column) into regions for the application of different materials.
E AdjustAnalyticalModel Adjusts the analytical model of the structural member in relation to those of the elements to which it joins.
E DiameterDimension Places a dimension that measures the diameter of an arc or circle.
E DiameterDimensionTypes Defines attributes for diameter dimensions.
E StructuralFabricArea Sketches the boundary of a fabric area to populate with fabric sheets.
E FabricReinforcementSymbol Places a symbol that represents the fabric sheet.
E PlaceOnHost Places a railing on a stair or ramp.
E DuctPressureLossReport Generates a pressure loss report for one or more duct systems.
E PipePressureLossReport Generates a pressure loss report for one or more pipe systems.
E OpenSampleFiles Opens a Revit sample file.
E SingleFabricSheetPlacement Places a single fabric sheet on floors, walls, and foundation slabs.
E AlignedMultiRebarAnnotation Tags multiple elements with a single annotation that displays aligned dimensions between references as well as parameters from the referenced elements. For example, all rebar in a rebar set can be referenced with a single tag.
E LinearMultiRebarAnnotation Tags multiple elements with a single annotation that displays linear dimensions between references as well as parameters from the referenced elements. For example, all rebar in a rebar set can be referenced with a single tag.
E FabricationSettings Opens the Fabrication Settings dialog.
E LinkIFC Links an IFC file to the current project to reference its information for additional design work.
E SelectionBox
E DuctAccessory Places a duct accessory. These accessories include dampers, filters and smoke detectors.
E AirTerminal Places a register, grille, or diffuser.
E Duct Draws rigid round, rectangular, or oval ductwork.
E MechanicalEquipment Places mechanical equipment such as boilers, furnaces, or fans.
E DuctFitting Places a duct fitting. These fittings include elbows, tees, wyes, crosses, and other types of fittings.
E FlexDuct Draws round and rectangular flexible ductwork.
E ConvertToFlexDuct Changes a length of ductwork connected to an air terminal from rigid duct to flexible duct.
E DuctLegend Places a legend to indicate the color fills associated with ductwork in duct systems.
E PanelSchedules Generates a panel schedule for a specified panel.
E ElectricalSettings Opens the Electrical Settings dialog to define distribution systems, wire types, cable tray and conduit sizes, and demand factors.
E LoadClassifications Assigns and specifies demand factors to a load classification.
E LightingFixture Places lighting fixtures such as ceiling, wall, and recessed lights.
E ElectricalEquipment Places electrical equipment such as panels and switch gear.
E ElectricalFixture Places electrical devices such as receptacles, junction boxes, and other power devices.
E CheckCircuits Verifies all circuits for proper connections to panels and valid system assignments. Errors are reported in a warning dialog.
E DemandFactors Applies demand factors to a panel.
E Pipe Draws rigid piping.
E FlexPipe Draws flexible piping.
E PipeFitting Places a pipe fitting. These fittings include elbows, tees, wyes, crosses, unions, and other types of fittings.
E PipeAccessory Places a pipe accessory. These accessories include connectors, valves, and inline water heaters.
E ArcWire Draws arced wire runs.
E PipeLegend Places a legend to indicate the color fills associated with piping systems.
E CheckPipeSystems Verifies all pipe systems for properly connected pipes and valid system assignments.
E CheckDuctSystems Verifies all duct systems for properly connected ductwork and valid system assignments.
E MechanicalSettings Opens the Mechanical Settings dialog.
E PlumbingFixture Places plumbing fixtures. These fixtures include sinks, water closets, tubs, drains, and various appliances.
E HeatingAndCoolingLoads Prepares a heating and cooling loads analysis report based on the existing building model.
E Sprinkler Places a sprinkler.
E ElectricalConnector Adds an electrical connector to a component.
E DuctConnector Adds a duct connector to a component.
E PipeConnector Adds a pipe connector to a component.
E Zone Defines HVAC zones within a project.
E BuildingOrSpaceTypeSettings Opens the Building and Space Type Settings dialog to manage building and space parameters and schedules.
E ChamferedWire Draws chamfered wire runs.
E SplineWire Draws splined wire runs.
E Communication Places communication devices such as intercom system components.
E Data Places data devices such as ethernet and other network connections.
E FireAlarm Places fire alarm devices such as smoke detectors, manual pull stations, and annunciators.
E Lighting Places lighting switches such as daylight sensors, occupancy sensors, and manual switches.
E NurseCall Places nurse call devices such as call stations, code blue stations, and door lights.
E Security Places security devices such as door locks, motion sensors, and surveillance cameras.
E Telephone Places a telephone jack.
E CableTrayConnector Adds a cable tray connector to a component.
E ConduitConnector Adds a conduit connector to a component.
E CableTrayFitting Places a cable tray fitting. These fittings include elbows, tees, wyes, crosses, and other unions.
E ConduitFitting Places a conduit fitting. These fittings include elbows, tees, wyes, crosses, and other unions.
E CableTray Draws cable tray runs such as rigid ladder or channel cable tray.
E Conduit Draws rigid conduit runs.
E ManageTemplates Manages and applies panel schedule templates to existing schedules in the project.
E EditATemplate Modifies a specific panel schedule template.
E ParallelConduits Creates parallel runs of conduit based on an initial conduit run.
E DuctPlaceholder Draws placeholder duct without elbow or tee fittings.
E PipePlaceholder Draws placeholder pipe without elbow or tee fittings.
E ParallelPipes Creates parallel runs of pipe based on an initial pipe run.
E ShowDisconnects Controls the display of graphical disconnect warnings for duct, pipe, conduit, cable tray, and electrical circuits.
E SiteComponent Adds site-specific elements, such as trees, parking islands, and fire hydrants.
E AreaAndVolumeComputations Specifies how areas and volumes are calculated, and creates area schemes.
E ShowWorkPlane Displays or hides the active work plane in the view.
E Fascia Adds fascia to the edge of a roof, soffit, or other fascia, or to model lines.
E Gutter Adds a gutter to the edge of a roof, soffit, or fascia, or to model lines.
E SlabEdgeFloor Shapes the horizontal edge of a floor slab.
E CheckSpelling Checks the spelling of text notes in a selection or in the current view or sheet.
E RepeatingDetailComponent Repeats a detail component along a path.
E InsertViewsFromFile Copies specified views (sheets, schedules, or drafting views) from a project file and saves them in the current project.
E Insert2DElementsFromFile Copies 2D elements from a detail view (saved in another project) into a detail view in the current project.
E SaveAsLibraryView Saves a copy of all loaded families, the selected family, group, or view to your library.
E AutomaticBeamSystem Creates a layout that is used to control the number and spacing of a series of parallel beams.
E PlaceMass Places an instance of a mass family in the project.
E InPlaceMass Creates a mass that is unique to the project.
E SynchronizeNow Updates a local copy of a workshared project using settings from the Synchronize with Central dialog.
E ExportGBXML Saves the project as a gbXML file.
E StructuralTrusses Adds a truss to the structure model.
E ShowLastReport Displays the most recent interference check report.
E GraphicalColumnSchedule Creates a graphical column schedule for the project.
E ApplyCoping Adds coping to steel beams and columns.
E RemoveCoping Removes coping from steel beams and columns.
E BeamSystemSymbol Places a beam system span tag.
E StructuralAreaReinforcement Sketches the boundary of an area to populate with rebar.
E AreaReinforcementSymbol Places a symbol that shows extents and hook types for the selected area reinforcement.
E SolidSweptBlend Creates a blend that sweeps along a defined path.
E VoidSweptBlend Creates a blend that sweeps along a defined path, and uses the resulting 3D shape to remove part of a solid 3D shape.
E EditRebarCover Edits the rebar cover references of an entire rebar host or an individual face.
E ColorSchemes Creates or modifies a color fill scheme for rooms and areas.
E TrimOrExtendToCorner Trims or extends elements (such as walls or beams) to form a corner.
E TrimOrExtendSingleElement Trims or extends one element (such as a wall, line, or beam) to a boundary defined by another element.
E TrimOrExtendMultipleElements Trims or extends multiple elements (such as walls, lines, and beams) to a boundary defined by another element.
E AlignedDimension Places dimensions between parallel references, or between multiple points.
E LinearDimension Places horizontal or vertical dimensions that measure the distance between reference points.
E AngularDimension Places a dimension that measures the angle between reference points sharing a common intersection.
E RadialDimension Places a dimension that measures the radius of an inner curve or fillet.
E ArcLengthDimension Places a dimension that measures the length of a curved wall or other element.
E MeasureBetweenTwoReferences Measures the distance between 2 elements or other references.
E MeasureAlongAnElement Measures the length of an element.
E MirrorDrawAxis Draws a temporary line to use as an axis for mirroring.
E KeyboardShortcuts Assigns key sequences to tools.
E BeamOrColumnJoins Adjusts how beams and columns frame into one another.
E SaveAsTemplate Saves the current Revit project file as a template.
E HalftoneOrUnderlay Customizes halftone and underlay elements in view.
E StairBySketch Adds a stair to the building model by sketching runs.
E LoadCases Adds and edits load cases for the analytical model.
E LoadCombinations Adds and edits load combinations for the analytical model.
E FindOrReplace Finds and replaces text in an open project file.
E EnergySettings Specifies parameters used to create the energy analytical model plus energy related data used in the energy simulation.
E RunEnergySimulation Subscription only feature. Sends energy analytical model and parameters to Autodesk Green Building Studio for simulation.
E ResultsAndCompare Displays graphical results of energy simulation, and provides tools for comparing, emailing, and exporting analysis results.
E ExportMassModelGBXML Saves the conceptual energy model as a gbXML file.
E GuideGrid Creates a new guide element in the active sheet to help align elements within and between sheets.
E CreateAssembly Creates an assembly from elements you select in the drawing area.
E StairTreadOrRiserNumber Creates a sequence of tread or riser numbers for a run in plan, elevation, or section views.
E ManageConnectionToARevitServerAccelerator
E RenderInCloud Renders 3D views online to create still images or interactive panoramas.
E RenderGallery Opens your online gallery of completed and in-progress renderings in a web browser.
E ShowEnergyModel Displays or hides the energy analytical model.
E DisplaceElements Creates a view-specific representation of model elements that can be displaced in the view.
E AssemblyCode Specifies the location of the assembly code file or reloads the assembly code table from the current file.
E FabricationPart Displays the Fabrication Part Browser pane.
E Playlist Provides an easy way to use Dynamo content.
E OpenRevitFile Opens any Revit file type.
E Close Close Revit.
E Save Saves the currently open project file.
E SaveAsProject Saves the current Revit project file.
E PrintSetup Specifies print options.
E Print Sends the current drawing area or selected views and sheets to a printer or a printable file.
E PrintPreview Displays a preview version of the current view or sheet to print.
E ModelBrowserContainer Show or hide model browser container.
E CopyToClipboard Copies selected elements to the clipboard.
E CutToClipboard Removes selected elements, and places them on the clipboard.
E PasteFromClipboard Pastes elements from the clipboard into the current view.
E TabViews Arranges all open views in drawing area into one tab group.
E TileViews Tiles all tabbed views in drawing area into seperate tab groups.
E ExitRevit Exit Revit.
E StatusBar Displays the status bar at the bottom of the Revit window.