AnalyticalModelFailures

Description:
Failures about AnalyticalModel.

Inheritance Hierarchy:
System.Object
Autodesk.Revit.DB.BuiltInFailures.AnalyticalModelFailures

public static class AnalyticalModelFailures

Public NotInheritable Class AnalyticalModelFailures

public ref class AnalyticalModelFailures abstract sealed

Name	Return Type	Description
P AdjustCurveTooShort	FailureDefinitionId	AdjustCurve is too short.
P AdjustEdgeTooShortErr	FailureDefinitionId	AdjustEdge is too short - continuable error version.
P AdjustEdgeTooShort	FailureDefinitionId	AdjustEdge is too short.
P AdjustEdgeTooShortWarn	FailureDefinitionId	AdjustEdge is too short.
P AnalyticalBeamSlabWarning	FailureDefinitionId	Beam and Slab Analytical Models do not have the same Analytical Projection Plane.
P AnalyticalDiscrepancyWarning	FailureDefinitionId	Distance between Analytical and Physical Models of Structural Element is beyond tolerance of [Value]
P AnalyticalGapWarning	FailureDefinitionId	Detected physical connection between Structural Elements, but did not detect Analytical intersection.
P AnalyticalLinkJoinedNodes	FailureDefinitionId	Analitycal Link is invalid. Reference nodes have been joined.
P AnalyticalLinkNotConnected	FailureDefinitionId	Analytical Link has lost one or more references.
P AnalyticalMemberInstability	FailureDefinitionId	Possible Member Instability, based on Release Conditions
P AnalyticalModelInstability	FailureDefinitionId	Possible Model Instability
P AnalyticalModelIsIncorrect	FailureDefinitionId	Analytical Model is not created for the structural element.
P AnalyticalPhysicalCheckDone	FailureDefinitionId	Analytical / Physical Model Consistency check is complete.
P AnalyticalSupportCycleWarning	FailureDefinitionId	Circular support chain detected
P AnalyticalTopBottomPlanesReversed	FailureDefinitionId	Analytical Top Projection Plane is partially or completely below Analytical Bottom Projection Plane. Please reset top and/or bottom planes to valid values.
P AutoDetectIgnoreLeaderWarning	FailureDefinitionId	Analytical Model for Structural Element has reset to its default location.
P BoundaryLinesIntersect	FailureDefinitionId	Boundary lines intersect.
P CannotCreateAnalyticalGeometry	FailureDefinitionId	Cannot construct Analytical Geometry.
P CannotKeepAnalyticalAdjustment	FailureDefinitionId	Analytical model Adjustment distance exceeds current Adjustment Snapping Distance. To adjust snap settings, go to the Structural Settings Dialog.
P CannotMakeAnalyticalGeometry	FailureDefinitionId	Cannot construct Analytical Geometry.
P CannotSlantAnalyticalWallError	FailureDefinitionId	Cannot slant a wall with an Analytical Model. Please disable the Analytical Model first.
P LoadsMayBeNotUpToDate	FailureDefinitionId	Reactions defined as Internal Load (Is Reaction) may no longer be valid since the analytical model has changed.
P ProjectionPlaneInvalidWall	FailureDefinitionId	Projection plane becomes invalid for this wall.
P ProjectionPlanesNotIntersect	FailureDefinitionId	Can't project Analytical Model. Planes do not intersect each other.
P ProjectionPlanesParallel	FailureDefinitionId	Can't project Analytical Model. Two or more projection planes are parallel.
P StructAnalyticalErrorProjection	FailureDefinitionId	Can't project Analytical Model to Analytical Projection Surface
P StructuralElementMayNotBeSupported	FailureDefinitionId	Structural Element may not be supported -- verify support for Element.
P StructWallAnalyticalErrorAlign	FailureDefinitionId	Can't align Analytical Model with joined Walls.
P StructWallAnalyticalErrorConversion	FailureDefinitionId	Can't convert Edges to Analytical Model curves.
P SupportCheckDone	FailureDefinitionId	Member support check is complete. No unsupported elements detected.
P WallAMLostAdjustmentReference	FailureDefinitionId	Wall Analytical Model has lost its adjustment reference.