PostableCommand

Description:
Enumerates all of the built-in commands which can be posted by an API application.

public enum PostableCommand

Public Enumeration PostableCommand

public enum class PostableCommand

type PostableCommand

Name	Description
E AcquireCoordinates	Determines the coordinates used in a linked project, and uses them for the current project.
E ActivateControlsAndDimensions	Enable or disable the visibility of pins, constraints, and temporary dimensions when multiple elements are selected.
E ActivateView	Enables you to modify the selected view without leaving the sheet.
E AddInsManager	Opens the Add-Ins Manager dialog, where you can enable and disable add-ins.
E AddToSet	Moves selected elements from the main model to one or more design options in a set.
E AirTerminal	Places a register, grille, or diffuser.
E Align	Aligns one or more elements with a selected element.
E AlignedDimension	Places dimensions between parallel references, or between multiple points.
E AlignedMultiRebarAnnotation	Tags multiple elements with a single annotation that displays aligned dimensions between references as well as parameters from the referenced elements. For example, all rebar in a rebar set can be referenced with a single tag.
E AlignedToCurrentView	Pastes elements that were cut or copied from another view into the current view.
E AlignedToPickedLevel	Pastes the selected elements into a elevation view or a section view.
E AlignedToSamePlace	Pastes the elements to the same place from which they were cut or copied.
E AlignedToSelectedLevels	Pastes multiple elements from one level to specified levels.
E AlignedToSelectedViews	Pastes selected elements, including view-specific elements such as dimensions, into specified views.
E AlignmentStation	Add an individual alignment station annotation.
E AlignmentStationLabelTypes	Defines attributes for Alignment Station Labels.
E AlignmentStationSet	Add a series of alignment station annotations.
E AllowableBarTypes	Defines the allowable rebar types (diameters) of the shape type.
E AnalysisDisplayStyles	Specifies a presentation format for visualizing analysis results.
E AnalyticalLink	Creates an analytical element that connects two separate analytical nodes.
E AnalyticalMember	Places an analytical member in the project.
E Anchors	Inserts anchors and the related holes in the selected model elements.
E AngularDimension	Places a dimension that measures the angle between reference points sharing a common intersection.
E AngularDimensionTypes	Defines attributes for angular dimensions.
E ApplyCoping	Adds coping to steel beams and columns.
E ApplyTemplatePropertiesToCurrentView	Applies properties stored in a view template to the current view.
E ArchitecturalColumn	Adds architectural columns to the building model.
E ArchitecturalFloor	Creates a floor for the current level of the building model.
E ArchitecturalWall	Creates a non-structural wall in the building model.
E ArcLengthDimension	Places a dimension that measures the length of a curved wall or other element.
E ArcWire	Draws arced wire runs.
E Area	Creates an area defined by walls and boundary lines.
E AreaAndVolumeComputations	Specifies how areas and volumes are calculated, and creates area schemes.
E AreaBasedLoadBoundary	Places a boundary line for electrical area based loads.
E AreaBoundary	Defines boundaries for areas.
E AreaPlan	Creates an area plan view.
E AreaReinforcementSymbol	Places a symbol that shows extents and hook types for the selected area reinforcement.
E AreaTag	Tags the selected area.
E Array	Creates a linear or radial array of selected elements.
E Arrowheads	Specifies line weights, fills, and styles for annotation arrowheads.
E AssemblyCode	Specifies the location of the assembly code file or reloads the assembly code table from the current file.
E AutomaticBeamSystem	Creates a layout that is used to control the number and spacing of a series of parallel beams.
E AutomaticCeiling	Creates a ceiling at a specified distance above the level in which it resides.
E AutomationCustomization	Lets you adjust the Structural Analytical Model Automation settings to suit the specific requirements of your project.
E BatchPrint	Print a large number of drawings with a batch job.
E Beam	Adds individual beams, a chain of beams, or beams along grid lines.
E BeamAnnotations	Places multiple beam tags, annotations, and spot elevations.
E BeamOrColumnJoins	Adjusts how beams and columns frame into one another.
E BeamSystemSymbol	Places a beam system span tag.
E Bolts	Inserts bolts and the related holes in the selected model elements.
E BottomChord	Draws the bottom chord of the truss family.
E BoundaryConditions	Defines point, line, and area boundary conditions in an analytical model.
E BoundaryConditionsSettings	Selects the family symbol and adjusts the spacing for boundary conditions.
E Brace	Adds diagonal structural members connected to beams and columns.
E BrowserOrganization	Changes the way that views are listed in the Project Browser.
E BuildingElevation	Creates an elevation view.
E BuildingOperatingSchedules	Opens the Building Operation Schedules Editor.
E BuildingOrSpaceTypeSettings	Opens the Building and Space Type Settings dialog to manage building and space parameters and schedules.
E CableTray	Draws cable tray runs such as rigid ladder or channel cable tray.
E CableTrayConnector	Adds a cable tray connector to a component.
E CableTrayFitting	Places a cable tray fitting. These fittings include elbows, tees, wyes, crosses, and other unions.
E Callout	Creates a rectangular callout in the view.
E CalloutTags	Specifies the callout head for callout tags, and the radius of the callout bubble.
E Camera	Creates a 3D view from the perspective of a camera placed in the view.
E CanvasTheme	Sets the color theme of the canvas to dark or light.
E ChamferedWire	Draws chamfered wire runs.
E CheckCircuits	Verifies all circuits for proper connections to panels and valid system assignments. Errors are reported in a warning dialog.
E CheckDuctSystems	Verifies all duct systems for properly connected ductwork and valid system assignments.
E CheckPipeSystems	Verifies all pipe systems for properly connected pipes and valid system assignments.
E CheckSpelling	Checks the spelling of text notes in a selection or in the current view or sheet.
E Close	Close Revit.
E CloseInactiveViews	Closes open views except for the currently active view. The current view remains open in the drawing area.
E Collaborate	Enables collaboration so team members can work on a model simultaneously.
E CollaborateInCloud	Enables collaboration in the cloud, which allows team members to work on a model simultaneously.
E ColorFillLegend	Places a legend in a view to indicate the meanings of color fills for rooms or areas.
E ColorSchemes	Creates or modifies a color fill scheme for rooms and areas.
E Communication	Places communication devices such as intercom system components.
E Conduit	Draws rigid conduit runs.
E ConduitConnector	Adds a conduit connector to a component.
E ConduitFitting	Places a conduit fitting. These fittings include elbows, tees, wyes, crosses, and other unions.
E ConnectionSettings	Opens the Structural Connections Settings dialog in which you can load and unload add-in connections into Revit. If no add-ins are present, no connections are available in the Connections tab.
E ContourCut	Creates a contour cut on the selected faces of a beam or a plate.
E Control	Adds a flip arrow to the view.
E ConvertToFlexDuct	Changes a length of ductwork connected to an air terminal from rigid duct to flexible duct.
E CoordinationModelAutodeskDocs	Links a coordination model view from Autodesk Docs into the current project.
E CoordinationModelChanges	Displays the overview of changes between the current version of a linked coordination model from Autodesk Docs and any of its previous versions.
E CoordinationModelLocal	Links a NWD or NWC file to provide context for the Revit model.
E CoordinationReviewUseCurrentProject	Displays warnings for monitored elements in the current project.
E CoordinationSelectLink	Displays warnings for monitored elements between linked projects and the host project.
E CoordinationSettings	Specifies mapping behavior when copying MEP fixtures from a linked model into the current project.
E Cope	Creates a parametric cope on intersecting beams and the related connection between the beams.
E CopeSkewed	Creates a skewed cope at the selected beam end, either at the top or at the bottom.
E Copy	Copies selected elements and places them in the specified location in the current view.
E CopyMonitorSelectLink	Copies selected elements from a linked project to the host project, and monitors changes to these elements.
E CopyMonitorUseCurrentProject	Monitors grids, levels, columns, walls, floors, and openings within the current project.
E CopyToClipboard	Copies selected elements to the clipboard.
E CornerCut	Creates a cut on the corner of a selected plate.
E CreateAnAreaBasedLoad	Creates an area based load from the area defined by the area based load boundaries.
E CreateAssembly	Creates an assembly from elements you select in the drawing area.
E CreateEnergyModel	Creates the energy analytical model.
E CreateFromImport	Creates a solid topographical element.
E CreateGroup	Creates a group of elements for easy reuse.
E CreateParts	Creates parts from the layers or subcomponents of a selected element.
E CreateSimilar	Places an element of the same type as the selected element
E CreateTemplateFromCurrentView	Creates a view template using the properties of the current view as the basis for the new template.
E CurtainGrid	Creates a grid line in a curtain wall or curtain system.
E CurtainSystemByFace	Creates a curtain system on the face of a mass or generic model.
E CurtainWallMullion	Creates a horizontal or vertical mullion on a curtain grid.
E CutBy	Creates a cut on a model element along the shape of another intersecting model element and a cut through the intersecting element. The connection between the two elements is also created.
E CutGeometry	Selects the geometry to cut.
E CutProfile	Changes the shape of elements that are cut in a view, such as roofs, walls, floors, and the layers of compound structures.
E CutThrough	Creates a cut through a model element around the contour of another intersecting model element. The weld between the two elements is also created.
E CutToClipboard	Removes selected elements, and places them on the clipboard.
E Data	Places data devices such as ethernet and other network connections.
E DeactivateView	Deactivates the view, so you can no longer change the view from the sheet.
E DecalTypes	Creates a decal that you can use to place images on surfaces of a building model for rendering.
E Default3DView	Opens the default orthographic 3D view.
E Delete	Removes selected elements from the building model.
E DeleteEnergyModel	Removes the energy analytical model from the Revit project.
E DemandFactors	Applies demand factors to a panel.
E Demolish	Marks elements as demolished in the current phase.
E DesignOptions	Creates and manages design option sets and individual design options for the project.
E DetailComponent	Adds a view-specific detail component to a view.
E DetailLevel	Specifies the detail level (coarse, medium, or fine) that applies to each view scale by default.
E DetailLine	Creates view-specific lines.
E DiameterDimension	Places a dimension that measures the diameter of an arc or circle.
E DiameterDimensionTypes	Defines attributes for diameter dimensions.
E DisplaceElements	Creates a view-specific representation of model elements that can be displaced in the view.
E Door	Adds doors to the building model.
E DormerOpening	Cuts a roof to create an opening for a dormer.
E DraftingView	Creates a view showing details that are not directly associated with the building model.
E DrawOnFace	Draws lines on existing surfaces.
E DrawOnWorkPlane	Draws lines on the active work plane.
E Duct	Draws rigid round, rectangular, or oval ductwork.
E DuctAccessory	Places a duct accessory. These accessories include dampers, filters and smoke detectors.
E DuctConnector	Adds a duct connector to a component.
E DuctFitting	Places a duct fitting. These fittings include elbows, tees, wyes, crosses, and other types of fittings.
E DuctLegend	Places a legend to indicate the color fills associated with ductwork in duct systems.
E DuctPlaceholder	Draws placeholder duct without elbow or tee fittings.
E DuctPressureLossReport	Generates a pressure loss report for one or more duct systems.
E DuplicateAsDependent	Creates a view that is dependent on the original view.
E DuplicateView	Creates a view that contains only the model geometry from the current view.
E DuplicateWithDetailing	Creates a view that includes model geometry and view-specific elements from the current view.
E DWFMarkup	Links marked-up DWF files into a Revit project so you can see the markups on corresponding sheets.
E Dynamo	Provides access to Dynamo, an open source visual programming platform for designers.
E DynamoPlayer	Preview, select, and run your Dynamo graphs from a single dialog.
E DynamoPlayerForSteel	Places steel connections on selected elements using pre-defined rules.
E EditATemplate	Modifies a specific panel schedule template.
E EditingRequests	Displays a list of other users' requests to borrow elements in your worksets, and your pending requests.
E EditRebarCover	Edits the rebar cover references of an entire rebar host or an individual face.
E EditSelection	Edits a previously saved selection set.
E ElectricalAnalyticalLoadTypeSettings	Opens the Electrical Analytical Load Type Settings dialog to define the power requirement for area-based loads.
E ElectricalConductorAndCableSettings
E ElectricalConnector	Adds an electrical connector to a component.
E ElectricalEquipment	Places electrical equipment such as panels and switch gear.
E ElectricalFixture	Places electrical devices such as receptacles, junction boxes, and other power devices.
E ElectricalSettings	Opens the Electrical Settings dialog to define distribution systems, wire types, cable tray and conduit sizes, and demand factors.
E ElementKeynote	Tags a selected element using the keynote specified for the element type.
E ElevationTags	Defines properties for elevation tags.
E EnergySettings	Specifies parameters used to create the energy analytical model.
E EquipmentLoad	Opens the System Browser to define equipment loads, such as a chiller or other specific equipment.
E ExitRevit	Exit Revit.
E ExportCADFormatsACIS_SAT	Creates DWG, DXF, DGN, OBJ, SAT, STL or STEP files.
E ExportCADFormatsDGN	Creates DWG, DXF, DGN, OBJ, SAT, STL or STEP files.
E ExportCADFormatsDWG	Creates DWG, DXF, DGN, OBJ, SAT, STL or STEP files.
E ExportCADFormatsDXF	Creates DWG, DXF, DGN, OBJ, SAT, STL or STEP files.
E ExportCADFormatsOBJ	Creates DWG, DXF, DGN, OBJ, SAT, STL or STEP files.
E ExportCADFormatsSTEP	Creates DWG, DXF, DGN, OBJ, SAT, STL or STEP files.
E ExportCADFormatsSTL	Creates DWG, DXF, DGN, OBJ, SAT, STL or STEP files.
E ExportDWFOrDWFx	Creates DWF or DWFx files.
E ExportExportTypes	Exports family types from the current family to a text (.txt) file.
E ExportFBX	Saves a 3D view as an FBX file.
E ExportGBXML	Saves the model as a gbXML file.
E ExportIFC	Creates IFC files.
E ExportImagesandAnimationsImage	Saves animations or image files.
E ExportImagesandAnimationsSolarStudy	Saves animations or image files.
E ExportImagesandAnimationsWalkthrough	Saves animations or image files.
E ExportODBCDatabase	Saves model data to an ODBC database.
E ExportOptionsExportSetupsDGN	Sets export options for CAD.
E ExportOptionsExportSetupsDWGOrDXF	Sets export options for CAD.
E ExportPDF	Creates PDF files.
E ExportReportsRoomOrAreaReport	Saves a schedule or Room/Area report.
E ExportReportsSchedule	Saves a schedule or Room/Area report.
E FabricationPart	Displays the MEP Fabrication Parts palette.
E FabricationSettings	Opens the Fabrication Settings dialog.
E FabricReinforcementSymbol	Located on the Symbol panel of the Annotate tab.Places a symbol that represents the fabric sheet.
E FamilyCategoryAndParameters	Assigns the properties of a predefined family category to the component you are creating.
E FamilyTypes	Allows you to enter parameter values for existing family types, add parameters to the family, or create new types within the family.
E Fascia	Adds fascia to the edge of a roof, soffit, or other fascia, or to model lines.
E FilledRegion	Creates a 2D, view-specific graphic with a fill pattern and a boundary line.
E FillPatterns	Creates or modifies drafting patterns and model patterns.
E Filters	Creates a filter to modify the visibility and graphics of elements in views based on element parameters.
E FindOrReplace	Finds and replaces text in an open project file.
E FireAlarm	Places fire alarm devices such as smoke detectors, manual pull stations, and annunciators.
E FlexDuct	Draws round and rectangular flexible ductwork.
E FlexPipe	Draws flexible piping.
E FloorByFaceFloor	Converts a mass floor into a floor of the building model.
E FloorPlan	Creates a floor plan view.
E FormWorkPlaneView	Enables the Workplane Viewer.
E FramingElevation	Creates a framing elevation to show vertical bracing.
E GlobalParameters	Specifies parameters that can be added to a project, and used to define values of other parameters.
E GradedRegion	Modifies topography to indicate changes during the construction process.
E GraphicalColumnSchedule	Creates a graphical column schedule for the project.
E GrayInactiveWorksets	Displays elements in inactive worksets as gray to visually distinguish them from elements in active worksets.
E Grid	Places column grid lines in the building design.
E GuideGrid	Creates a new guide element in the active sheet to help align elements within and between sheets.
E Gutter	Adds a gutter to the edge of a roof, soffit, or fascia, or to model lines.
E HalftoneOrUnderlay	Customizes halftone and underlay elements in view.
E HideBoundaryOpenEnds	Hides dots that display on the open ends of area based load boundary lines.
E HideCategory	Hides all elements that belong to a selected category in the current view.
E HideElements	Hides selected elements in the current view.
E Holes	Inserts holes on the selected face of model elements.
E IdsOfSelection	Displays unique identifiers for the selected elements.
E ImportCAD	Imports data or 3D geometry from other CAD programs to a Revit model or family.
E ImportGBXML	Imports analysis data from a gbXML file.
E ImportImage	Imports a raster image into a Revit project to use as a background image or visual aid during the creation or presentation of the model.
E ImportPDF	Inserts a PDF file into a model view to use as a background image or visual aid.
E ImportTypes	Imports family types from a text (.txt) file into the current family.
E InPlaceMass	Creates a mass that is unique to the project.
E Insert2DElementsFromFile	Copies 2D elements from a detail view (saved in another project) into a detail view in the current project.
E InsertCoupler	Places a reinforcement coupler element to join rebar in a host.
E InsertViewsFromFile	Copies specified views (sheets, schedules, or drafting views) from a project file and saves them in the current project.
E Insulation	Places a batt insulation graphic in a detail view.
E Isolated	Adds footings or pile caps to the building model.
E JoinGeometry	Creates clean joins between 2 or more host elements that share a common face, such as walls and floors.
E JoinOrUnjoinRoof	Connects roofs to other roofs or walls, or reverses a previous join.
E KeyboardShortcuts	Assigns key sequences to tools.
E KeynoteLegend	Creates a list of the keynotes used in a project, and their definitions.
E KeynotingSettings	Specifies the location of the keynote table and the numbering method for keynotes.
E Label	Creates a label for the annotation symbol.
E LabelContours	Displays the elevations of contour lines.
E LaunchAsApp	Open the Content Catalog in a separate window.
E LaunchInBrowser	Access the Content Catalog in the default browser.
E LaunchInDockedWindow	Access the Content Catalog in the Revit session from a docked window.
E Legend	Creates a list of building components and annotations used in a project.
E LegendComponent	Adds a graphic representation of a selected model element to a legend view.
E Level	Adds a level to the model.
E Lighting	Places lighting switches such as daylight sensors, occupancy sensors, and manual switches.
E LightingFixture	Places lighting fixtures such as ceiling, wall, and recessed lights.
E LinearDimension	Places horizontal or vertical dimensions that measure the distance between reference points.
E LinearDimensionTypes	Defines attributes for linear (horizontal and vertical) dimensions.
E LinearMultiRebarAnnotation	Tags multiple elements with a single annotation that displays linear dimensions between references as well as parameters from the referenced elements. For example, all rebar in a rebar set can be referenced with a single tag.
E LinePatterns	Creates or modifies line patterns.
E LineStyles	Creates or modifies line styles.
E LineWeights	Creates or modifies line weights.
E Linework	Overrides the line style for a selected line in the active view only.
E LinkCAD	Links a CAD file to the current Revit project.
E LinkIFC	Links an IFC file to the current project to reference its information for additional design work.
E LinkImage	Inserts a link to an image into a model view.
E LinkPDF	Inserts a link to a PDF into a model view.
E LinkRevit	Links another Revit model to the current model.
E LinkTopography	Links existing topography to the current Revit model.
E LoadAsGroup	Loads a Revit file as a group.
E LoadAsGroupIntoOpenProjects	Loads the current project as a group into another open project or family.
E LoadAutodeskFamily	Load an Autodesk family from the cloud.
E LoadCasesAndCombinations	Adds and edits load combinations for the analytical model.
E LoadCasesDisplay	Allows the adjustment of the Category assignment for each load case.
E LoadClassifications	Assigns and specifies demand factors to a load classification.
E LoadedTagsAndSymbols	Lists the tags and symbols that will be used for each element category.
E LoadFamilyIntoProjectAndClose	Loads the family into open projects or family files and closes the family after it loads.
E LoadIntoProject	Loads the rebar shape into open projects or family files.
E LoadRebarShapeIntoProjectAndClose	Loads the rebar shape into open projects or family files and closes the family after it loads.
E Loads	Defines point, line, and area loads in an analytical model.
E LoadSelection	Loads a previously saved selection set.
E LoadShapes	Loads a Revit family into the current file.
E LoadsScalingDisplay	Overrides the load type graphics scale using the project scale.
E Location	Specifies the geographic location for the project.
E MacroManager	Opens the Macro Manager to run, create, or delete a macro.
E MacroSecurity	Specifies the default security settings for macros in the Revit application.
E MajorSegment	Identifies one segment of the rebar shape that maintains its general position in rotation and auto-expansion behaviors.
E ManageConnectionToARevitServerAccelerator	Specifies the Revit Server Accelerator to use for worksharing, or changes the accelerator to which you are connected.
E ManageImages	Lists all raster images used in the project.
E ManageLinks	Provides options to manage linked files and imported data for various file types.
E ManageTemplates	Manages and applies panel schedule templates to existing schedules in the project.
E ManageViewTemplates	Displays parameters for view templates in the project.
E MaskingRegion	Creates a graphic that obscures elements in a project or family.
E Matchline	Adds matchlines to indicate where a view is split.
E MatchTypeProperties	Converts one or more elements to match the type of another element in the same view.
E MaterialAssets	Modifies the assets that define a material.
E MaterialKeynote	Tags a selected element using the keynote specified for its material.
E Materials	Specifies the materials and associated properties to apply to model elements or families.
E MaterialTag	Tags a selected element using the description specified for its material.
E MaterialTakeoff	Creates a list of the sub-components or materials of any Revit family category.
E MeasureAlongAnElement	Measures the length of an element.
E MeasureBetweenTwoReferences	Measures the distance between two elements or references.
E MechanicalControlDevice	Places a mechanical control device such as thermostats, CO2 sensors, and humidistats.
E MechanicalEquipment	Places mechanical equipment such as boilers, furnaces, or fans.
E MechanicalSettings	Opens the Mechanical Settings dialog.
E MEPFabricationDuctworkStiffener	Places a stiffener on fabrication ductwork.
E MirrorDrawAxis	Draws a temporary line to use as an axis for mirroring.
E MirrorPickAxis	Reverses the position of selected elements, using an existing line or edge as the mirror axis.
E MirrorProject	Flips the position of a project around a selected axis.
E Miter	Creates a miter cut vertically or at the bisecting line of two beams and the related connection between the beams.
E ModelInPlace	Creates a component that is unique to the project.
E ModelLine	Creates a line that exists in 3D space and is visible in all views of a project.
E ModelText	Adds 3D text to the building model.
E Move	Moves selected elements to the specified location in the current view.
E MultiCategoryTag	Attaches tags to elements of multiple categories, based on a shared parameter.
E Multiplanar	Toggles the ability to define a rebar shape bent in more than one plane.
E MultiplePaths	Places multiple paths of travel between two selected points using a specified minimum path separation for each path.
E MultipleValuesIndication	Specifies the value indicated for a parameter when multiple elements with different parameter values are selected.
E MultiPointRouting	Automatically build a run of connected MEP fabrication parts by clicking points in the model.
E NavigationBar	Shows or hides the navigation bar, which provides access to the ViewCube, SteeringWheels, and zoom/pan functions.
E NewAnnotationSymbol	Creates a tag or symbol to identify elements in the project.
E NewConceptualMass	Opens a template for creating a conceptual massing model.
E NewFamily	Creates a set of custom components to use in projects.
E NewProject	Creates a Revit project file.
E NewSheet	Creates a page for a document set.
E NewTitleBlock	Opens a template for creating a Title Block family.
E NoteBlock	Creates a schedule of annotations added using the Symbol tool.
E NurseCall	Places nurse call devices such as call stations, code blue stations, and door lights.
E ObjectStyles	Specifies line weights, colors, and patterns, and materials for model objects, annotation objects, and imported objects.
E Offset	Copies or moves a selected element (such as a line, wall, or beam) a specified distance perpendicular to its length.
E OneWayIndicator	Place a one-way annotation family into the view.
E OpenCloudModel	Opens a Revit cloud model.
E OpenFamily	Opens a Revit family.
E OpenIFC	Opens an IFC file.
E OpenIFCOptions	Sets options for the IFC template and class mapping.
E Opening	Creates an opening in a host, such as a wall or ceiling.
E OpeningByFace	Creates an opening that is perpendicular to the selected face of a roof, floor, or ceiling.
E OpenProject	Opens a Revit project.
E OpenRevitFile	Opens any Revit file type.
E OpenSampleFiles	Opens a Revit sample file.
E Options	Display Revit Options Dialog.
E OverrideByCategory	Changes the graphic display settings for all elements that belong to the same category as the selected element in the current view.
E OverrideByElement	Changes the graphic display settings for selected elements in the current view.
E OverrideByFilter	Changes the graphic display settings for all elements in the view that meet the criteria specified in a filter.
E Paint	Applies a material to the face of an element.
E PAndIDModeler	Create a 3D piping model directly from a 2D P&ID drawing in the cloud.
E PAndIDSettings	Manage the mappings between elements, such as services and families, between the P&ID drawing and the Revit model.
E PanelByBoundary	Creates a planar analytical panel for the current work plane after a sketch of the contour.
E PanelByExtrusion	Creates an analytical panel perpendicular to the current work plane after a sketch of the path.
E PanelSchedules	Generates a panel schedule for a specified panel.
E ParallelConduits	Creates parallel runs of conduit based on an initial conduit run.
E ParallelPipes	Creates parallel runs of pipe based on an initial pipe run.
E ParametersService	Use the Parameters Service to manage shared parameters and import them into a Revit session.
E ParkingComponent	Adds parking spaces to a topography.
E PasteFromClipboard	Pastes elements from the clipboard into the current view.
E PathOfTravel	Creates a path of travel along the shortest distance between 2 selected points.
E PathReinforcementSymbol	Places a symbol that shows extents and hook types for the selected path reinforcement.
E PDF	Creates PDF files.
E PeopleContent	Place a family to indicate a person and a physical distance radius into the view.
E Phases	Specifies project phases, phase filters, and graphic overrides for phases.
E PickAPlane	Select a plane in the view to define a new workplane.
E PickToEdit	Opens a design option for editing by selecting an element contained in the option.
E Pin	Locks a model element in place.
E Pipe	Draws rigid piping.
E PipeAccessory	Places a pipe accessory. These accessories include connectors, valves, and inline water heaters.
E PipeConnector	Adds a pipe connector to a component.
E PipeFitting	Places a pipe fitting. These fittings include elbows, tees, wyes, crosses, unions, and other types of fittings.
E PipeLegend	Places a legend to indicate the color fills associated with piping systems.
E PipePlaceholder	Draws placeholder pipe without elbow or tee fittings.
E PipePressureLossReport	Generates a pressure loss report for one or more pipe systems.
E PlaceAComponent	Places an element in the building model, based on a selected element type.
E PlaceDecal	Places an image on surfaces of a building model for rendering.
E PlaceDetailGroup	Places an instance of a detail group in the view.
E PlaceMass	Places an instance of a mass family in the project.
E PlaceOnStairOrRamp	Places a railing on a stair or ramp.
E PlaceView	Adds a view to a sheet.
E PlanRegion	Creates a plan region within a view.
E Plate	Creates a structural plate in the building model.
E PlumbingEquipment	Places plumbing equipment such as hot water heaters, domestic water pumps, and sewage pumps.
E PlumbingFixture	Places plumbing fixtures. These fixtures include sinks, water closets, tubs, drains, and various appliances.
E PointCloud	Links a Point Cloud file (.rcp or .rcs) into the current project.
E Print	Sends the current drawing area or selected views and sheets to a printer or a printable file.
E PrintPreview	Displays a preview version of the current view or sheet to print.
E PrintSetup	Specifies print options.
E ProjectBrowser	Displays the Project Browser.
E ProjectInformation	Specifies basic information about the project, including the project status and client information.
E ProjectParameters	Specifies parameters that can be added to categories of elements in a project, and used in schedules.
E ProjectUnits	Specifies the display format for units of measure.
E PropertyLine	Creates a property line in a plan view.
E PropertyLineData	Define the angle display and units used when creating and labeling property lines.
E PublishCoordinates	Determines the coordinates used in the current model, and uses them for a linked model.
E PublishSettings	Selects the views and sheets to publish to the cloud.
E PurgeUnused	Removes unused families and types from a project.
E RadialDimension	Places a dimension that measures the radius of an inner curve or fillet.
E RadialDimensionTypes	Defines attributes for radial dimensions.
E Railing	Creates a railing by sketching the railing path.
E Ramp	Adds a ramp to the building model.
E RebarBendingDetail	Creates realistic or schematic bar bending details for the selected individual rebar or sets.
E RebarCoverSettings	Adds, removes, or modifies the default rebar cover settings.
E RebarLine	Defines lines and geometry of the rebar shape.
E ReCenterReference	Move the reference lines of all of the rooms in the view back to the center of the rooms.
E ReconcileHosting	Lists tags and elements hosted by the linked model that require review, due to changes in the linked model.
E Redo	Reverses the effects of the previous UNDO command
E ReferenceLine	Creates a reference line that you can use when creating a new family, or to create constraints for the family.
E ReferencePlane	Creates a reference plane using drawing tools.
E ReflectedCeilingPlan	Creates a reflected ceiling plan view.
E ReinforcementNumbers	Defines or edits numbering sequences by partition for rebar and fabric sheets.
E ReinforcementSettings	Customizes reinforcement settings such as rounding parameters, rebar hosting and abbreviations of area/path reinforcement tagging.
E RelinquishAllMine	Releases ownership of worksets and borrowed elements that have not been changed.
E ReloadLatest	Loads updates from the central model to your local copy of the project.
E RelocateProject	Moves the model relative to the shared coordinate system.
E RemoveCoping	Removes coping from steel beams and columns.
E RemoveHiddenLinesByElement	Removes hidden lines for model elements and detail elements that are obscured by other elements in the active view only.
E RemovePaint	Removes paint from selected faces.
E Render	Creates a photorealistic image of a building model.
E RenderGallery	Opens your online gallery of completed and in-progress renderings in a web browser.
E RenderInCloud	Renders 3D views online to create still images or interactive panoramas.
E RepairCentralModel	Repairs a corrupt central model.
E RepeatComponent	Repeats the selected applied component along a divide path or surface.
E RepeatingDetailComponent	Repeats a detail component along a path.
E ReportSharedCoordinates	Displays shared coordinates of a linked model within a host model.
E ResetSharedCoordinates	Eliminate shared coordinates in the host model.
E RestoreBackup	Rolls back changes made to a workshared project, or saves a selected backup version to be the current working model.
E RevealObstacles	Highlights categories that are considered obstacles in the view.
E RevealWall	Extrudes a profile along a path to create a cutout in a wall.
E ReviewWarnings	Displays a list of messages that you can ignore or resolve.
E RevisionCloud	Adds a revision cloud to the current view or sheet to indicate design areas that have changed.
E RevisionSchedule	Adds a revision schedule to a custom title block.
E RoofByExtrusion	Creates a roof by extruding a profile that you sketch.
E RoofByFace	Creates an element using a non-vertical face of a mass.
E RoofByFootprint	Creates a roof using the building footprint to define its boundaries.
E Room	Creates a room bounded by model elements (such as walls, floors, and ceilings) and separation lines.
E RoomSeparator	Creates a separation line to bound rooms where no walls or other room-bounding elements exist.
E RoomTag	Tags the selected room.
E Rotate	Rotates selected elements around an axis.
E RotateProjectNorth	Changes the relationship of elements relative to Project North (the top of the drawing area) in plan views.
E RotateTrueNorth	Changes the angle for a project relative to True North.
E RunAnalyticalToPhysicalForBuildings	Generates the structural Physical Model based on the selected analytical elements.
E RunInterferenceCheck	Locates invalid intersections between elements in a project.
E RunPhysicalToAnalyticalForBuildings	Generates the structural analytical model for selected structural physical elements.
E Save	Saves the currently open project file.
E SaveAsCloudModel	Saves the current Revit model to the cloud.
E SaveAsFamily	Saves the current family.
E SaveAsLibraryFamily	Saves a copy of all loaded families, the selected family, group, or view to your library.
E SaveAsLibraryGroup	Saves a copy of all loaded families, the selected family, group, or view to your library.
E SaveAsLibraryView	Saves a copy of all loaded families, the selected family, group, or view to your library.
E SaveAsProject	Saves the current Revit project file.
E SaveAsTemplate	Saves the current Revit project file as a template.
E SaveSelection	Saves the currently selected elements as a set.
E SawCutFlange	Creates a cut on a beam adjusted according to the flange of another intersecting beam and the related connection between the beams.
E SawCutWeb	Creates a cut on a beam adjusted according to the web of another intersecting beam and the related connection between the beams.
E Scale	Resizes the selected item.
E ScheduleOrQuantities	Creates a key schedule or a schedule of building components.
E ScopeBox	Controls the visibility of datum elements (grids, levels, and reference planes) in specific views.
E Section	Creates a section view.
E SectionTags	Specifies the shape of heads and tails for section tags.
E Security	Places security devices such as door locks, motion sensors, and surveillance cameras.
E SelectById	Uses an element's unique identifier to locate and select the element in the current view.
E SelectionBox	Isolates selected elements in the current view (if a 3D isometric view) or the default 3D view.
E SetWorkPlane	Specifies the work plane for the current view or for a selected work-plane-based element.
E ShaftOpening	Creates a vertical opening that spans multiple levels, cutting through intervening roofs, floors, and ceilings.
E ShapeStatus	When enabled, this button indicates that the rebar shape is not valid.
E SharedParameters	Specifies parameters that can be used in multiple families and projects.
E SharedViews	Opens and closes the Shared Views palette.
E ShearStuds	Creates shear studs and the related welds on the selected face of model elements.
E SheetIssuesOrRevisions	Specifies revision information for the project.
E SheetList	Creates a schedule that lists the drawings in the project.
E Shorten	Creates a shorten object on the selected beam that can trim or extend the beam.
E ShowBoundaryOpenEnds	Displays dots on the open ends of area based load boundary lines.
E ShowDisconnects	Controls the display of graphical disconnect warnings for duct, pipe, conduit, cable tray, electrical circuits, and fabrication hangers.
E ShowHiddenLinesByElement	Displays hidden lines for individual model elements and detail elements that are obscured by other elements in the current view.
E ShowHistory	Displays a list of all the times a workshared file (the central model or a local copy of the central model) was saved and who saved it.
E ShowLastReport	Displays the most recent interference check report.
E ShowMassByViewSettings	Displays masses based on the settings for the current view. By default, masses are turned off.
E ShowMassFormAndFloors	Displays mass forms and any mass floors you have specified in all views.
E ShowMassSurfaceTypes	Displays mass faces, including any glazing and shades that have been specified.
E ShowMassZonesAndShades	Displays mass zones, glazing, and shades if they have been specified.
E ShowWarningsInViews	Select to show structural connection warning marks in your project views. Deselect to hide warning marks.
E ShowWorkPlane	Displays or hides the active work plane in the view.
E ShowWorksharingMakeEditableControls	Enables/Disables display of "Make Editable" controls when elements are selected.
E SingleFabricSheetPlacement	Places a single fabric sheet on floors, walls, and foundation slabs.
E SiteComponent	Adds site-specific elements, such as trees, parking islands, and fire hydrants.
E Slab	Adds a foundation slab to the building model.
E SlabEdgeFloor	Shapes the horizontal edge of a floor slab.
E Snaps	Specifies snap increments, and enables or disables snap points.
E Soffit	Creates a roof soffit in the building model.
E SolidBlend	Creates a solid 3D shape that changes along its length, blending from a starting shape to an ending shape.
E SolidExtrusion	Creates a 3D solid by extruding a 2D shape (profile).
E SolidRevolve	Creates a 3D shape by sweeping a 2D profile around an axis.
E SolidSweep	Creates a 3D shape by sweeping a 2D profile along a path.
E SolidSweptBlend	Creates a blend that sweeps along a defined path.
E Space	Places analytical spaces to account for the entire volume within the model. This includes rooms, plenums and chases.
E SpaceNaming	Assigns the names and numbers from architectural rooms to MEP spaces used for building performance analysis.
E SpaceSeparator	Draws a space separation line to divide space.
E SpaceTag	Labels spaces in a project.
E SpanDirectionSymbol	Places a span direction symbol on a structural floor.
E SpatialGrid	Place a square or hexagonal grid in a room element.
E SpecifyCoordinatesAtPoint	Relocates a model and rotates the model to True North by specifying coordinates for North/South, East/West, and Elevation.
E SplineWire	Draws splined wire runs.
E SplitElement	Cuts an element into separate individual elements.
E SplitFace	Divides the face of an element (such as a wall or floor) into regions for the application of different materials.
E SplitWithGap	Splits a wall, pipe, duct, cable tray, conduit, structural framing or a column into 2 segments with a defined gap.
E SpotCoordinate	Displays the North/South and East/West coordinates of points in a project.
E SpotCoordinateTypes	Defines attributes for spot coordinates.
E SpotElevation	Displays the elevation of a selected point.
E SpotElevationTypes	Defines attributes for spot elevations.
E SpotSlope	Displays the slope at a specific point on a face or an edge of a model element.
E SpotSlopeTypes	Defines attributes for spot slopes.
E Sprinkler	Places a sprinkler.
E Stair	Adds a stair to the building model by creating common run, landing, and support components.
E StairPath	Annotates the slope direction and walk line of a stair.
E StairTreadOrRiserNumber	Creates a sequence of tread or riser numbers for a run in plan, elevation, or section views.
E StartingView	Specifies the view that first displays when you open the model.
E StatusBar	Displays the status bar at the bottom of the Revit window.
E StatusBarDesignOptions	Displays the active design option in the status bar.
E StatusBarWorksets	For a workshared project, displays the active workset and the number of Others' pending Editing Requests in the status bar.
E StructuralAreaReinforcement	Sketches the boundary of an area to populate with rebar.
E StructuralColumn	Adds a vertical load-bearing element to the building model.
E StructuralConnection	Adds a structural connection to structural elements.
E StructuralFabricArea	Located on the Reinforcement panel of the Structure tab (or Modify tab for floors, walls and foundation slabs).Sketches the boundary of a fabric area to populate with fabric sheets.
E StructuralFloor	Creates a structural floor (slab) for the current level of the building model.
E StructuralPathReinforcement	Sketches the path of evenly placed reinforcing bars that are created perpendicular to the sketch.
E StructuralPlan	Creates a structural plan view.
E StructuralRebar	Places planar, multi-planar or free form rebar.
E StructuralSettings	Defines settings for analytical elements and the display of structural framing.
E StructuralTrusses	Adds a truss to the structure model.
E StructuralWall	Creates a load-bearing or shear wall in the building model.
E SubstitutionSettings	Opens the Twinmotion Substitution Settings dialog.
E SunSettings	Specifies the location of the sun for solar studies, walkthroughs, and rendered images.
E SweepWall	Creates a wall sweep by extruding a profile along a path.
E SwitchJoinOrder	Changes the order in which elements join with one another.
E Symbol	Places a 2D annotation drawing symbol in the current view.
E SymbolicLine	Creates lines that are meant for symbolic purposes only, and are not part of the actual geometry of the component or building model.
E SynchronizeAndModifySettings	Allows you to specify options for the synchronization operation.
E SynchronizeNow	Updates a local copy of a workshared project using settings from the Synchronize with Central dialog.
E SystemBrowser	Displays the System Browser. Displays a hierarchical list of all the components in each discipline in a project, either by system or by zone.
E SystemsAnalysis	Performs a systems analysis and generates a report for whole building energy simulation and analysis.
E TabViews	Arranges all open views in the drawing area as tabs in a single window.
E TagAllNotTagged	Adds tags to multiple elements in one step.
E TagByCategory	Attaches a tag to an element based on the element category.
E Telephone	Places a telephone jack.
E TemporaryDimensions	Specifies the placement and component references for temporary dimensions.
E Text	Adds text annotations (notes) to the current view.
E ThinLines	Displays all lines on screen as a single width, regardless of zoom level.
E TileViews	Arranges all open views within the application window, tiled so you can see each one in the drawing area.
E TitleBlock	Creates a title block element in a sheet view.
E ToggleHome	Toggle Revit Home.
E TogglePAndIDModelerBrowser	Toggle P&ID Modeler browser.
E TogglePropertiesPalette	Displays or hides a palette where you can view and edit instance properties.
E ToggleRevealHiddenElementsMode	Toggle reveal hidden elements mode.
E TopChord	Draws the top chord of the truss family.
E TopographyCutVoidStability	Enable void cut stability.
E Toposolid	Creates a solid topographical element.
E ToposolidByFace	Creates an element using a non-vertical face of a mass.
E ToposolidSmoothShading	Display toposolid elements in the model with smoothed surfaces.
E TransferProjectStandards	Copies selected project settings from another open project to the current project.
E TrimOrExtendMultipleElements	Trims or extends multiple elements (such as walls, lines, and beams) to a boundary defined by another element.
E TrimOrExtendSingleElement	Trims or extends one element (such as a wall, line, or beam) to a boundary defined by another element.
E TrimOrExtendToCorner	Trims or extends elements (such as walls or beams) to form a corner.
E TypeProperties	Displays properties for the family type to which the selected element belongs.
E UncutGeometry	Selects which geometry does not get cut when you join geometry.
E Undo	Reverses the most recent action
E UnjoinGeometry	Removes a join between 2 or more elements.
E Unpin	Unlocks a model element so it can move.
E UserKeynote	Tags an element with a keynote that you select.
E VerticalOpening	Cuts a vertical opening through a roof, floor, or ceiling.
E ViewCube	Shows or hides the ViewCube, which allows you to change the orientation of a 3D view.
E ViewList	Creates a schedule of the views in the project.
E ViewReference	Adds an annotation indicating the sheet number and detail number for a selected view.
E VisibilityOrGraphics	Overrides the default visibility and graphic display of model elements and annotations in the current view.
E VoidBlend	Creates a 3D blend, which is then used to remove part of a solid 3D shape.
E VoidExtrusion	Creates a 3D shape that is then used to remove part of a solid 3D shape.
E VoidRevolve	Creates a 3D shape by sweeping a 2D profile around an axis, and uses the 3D shape to remove part of a solid 3D shape.
E VoidSweep	Creates a 3D shape by sweeping a 2D profile along a path, and uses the resulting 3D shape to remove part of a solid 3D shape.
E VoidSweptBlend	Creates a blend that sweeps along a defined path, and uses the resulting 3D shape to remove part of a solid 3D shape.
E Walkthrough	Creates an animated 3D walkthrough of a model.
E Wall	Creates foundations hosted by walls.
E WallByFaceWall	Creates walls using faces of a mass or generic model.
E WallJoins	Changes how walls join together (butt, miter, square off).
E WallOpening	Cuts a rectangular opening in a straight or curved wall.
E Web	Draws the web elements between the chords.
E Welds	Inserts a weld on one of the available edges of the model elements to be connected.
E Window	Adds windows to the building model.
E Worksets	Creates worksets and adds elements to them.
E WorksharingMonitor	Launches Worksharing Monitor to manage a file-based workshared model.
E ZoneBySketch	Create a zone by sketching the perimeter.
E ZoneBySpace	Create a zone by selecting spaces.