RebarFailures

Description:
Failures about Rebar.

Inheritance Hierarchy:
System.Object
Autodesk.Revit.DB.BuiltInFailures.RebarFailures

public static class RebarFailures

Public NotInheritable Class RebarFailures

public ref class RebarFailures abstract sealed

[<AbstractClassAttribute>]
[<SealedAttribute>]
type RebarFailures = class end

Name	Return Type	Description
P BarDiameterTooLarge	FailureDefinitionId	Rebar Bar Diameter is too large.
P BarTypeDoesNotAllowHooksOfCurrentShape	FailureDefinitionId	You have selected a Bar Type which does not allow the Hooks used by the current shape. Please select a different Shape / Bar Type combination, or change the Hook permissions for the desired Bar Type (see Hook Lengths under Rebar Bar properties).
P BendDiameterTooLarge	FailureDefinitionId	Rebar Bend Diameter is too large.
P BendDiameterTooSmall	FailureDefinitionId	Rebar Bend Diameter is too small.
P CannotCreateFreeFormSetDueToShortBar	FailureDefinitionId	Cannot create the rebar set using the current references because at least one bar is below the minimum allowed length. Edit the covers and extents of the set and try the desired layout options again.
P CannotKeepVariabilityOfRebarInGroup	FailureDefinitionId	Modifications to the rebar set might cause it to revert to a uniform distribution and reset all disabled constraints. This can occur for layout changes as well as modifications to the geometry.
P CannotPlaceRebar	FailureDefinitionId	Can't find a host for Rebar.
P CannotPlaceRebarWarn	FailureDefinitionId	Can't find a host for Rebar.
P CannotSolveRebarShapeUsingDataFromDimension	FailureDefinitionId	Cannot solve rebar shape using the current constraints.
P CannotSolveRebarWithDelayedConstraints	FailureDefinitionId	There are rebar handles with invalid selected targets to constrain. The bar preview corresponds to latest valid constraints.
P CantMakeFillets	FailureDefinitionId	The bar cannot be bent in that shape. Check the bending diameter and the bar type.
P ChangeUnitsFormatWarn	FailureDefinitionId	The modification of the unit will cause the change of the Reinforcement rounding format. Do you want to continue?
P ClearPresentationForAllBarsInRebarSet	FailureDefinitionId	All Bars in a Free Form Rebar Set have been hidden.
P ConstraintForHandleIsDisabled	FailureDefinitionId	The constriant for current handle is disabled.
P CoverTooLong	FailureDefinitionId	Rebar Cover length is too large for host thickness.
P CrankDoesntFitSegment	FailureDefinitionId	Curves are too small to fit the Rebar Shape with Crank.
P CrankTypeWasDeleted	FailureDefinitionId	Crank type was deleted.
P DelayedConstraintForHandle	FailureDefinitionId	The selected constraint targets do not satisfy a valid constraint. The rebar preview corresponds to latest valid rebar constraints.
P FormulaLengthExceedsArrayLengthLimit	FailureDefinitionId	Fixed custom spacing formula produces an array length that exceeds the allowed limits.
P HideAllBarsInRebarSet	FailureDefinitionId	All Bars in Rebar Set have been hidden.
P HostTopologyChange	FailureDefinitionId	A reinforced host has undergone a major change. The reinforcement must be removed.
P IncompleteShape	FailureDefinitionId	Rebar Shape [Family Name] is not fully defined and cannot be loaded into the project.
P InvalidRebarHost	FailureDefinitionId	Rebar can be placed only in Concrete Structural elements.
P InvalidRebarHostFamilyCanHostRebarParam	FailureDefinitionId	Rebar can't be placed in this Generic Model element because rebar hosting is disabled in the family [Name].
P InvalidRebarHostNonConcrete	FailureDefinitionId	Rebar can't be placed in a structural family unless its [Material Type] is [Concrete].
P InvalidRebarHostNonStructural	FailureDefinitionId	Rebar can't be placed in a non-structural element.
P InvalidRebarHostWrongCategory	FailureDefinitionId	Rebar can't be placed in a family of category [Name].
P MaxHookExtensionMultiplierWarn	FailureDefinitionId	The allowable range of values for the Rebar Hook Extension Multiplier is from 0.01 to 99.0.
P MissingCurrentConstraintForHandle	FailureDefinitionId	The current handle has no constraint. Please select a valid target to apply a new constraint.
P NoElementsToEditConstraints	FailureDefinitionId	There is no Rebar to edit constraints.
P NoRebarSelected	FailureDefinitionId	At least one Rebar should be selected.
P NoSurfPatternOnRebar	FailureDefinitionId	Rebar elements do not support surface patterns. The surface pattern associated with this material will not be displayed on the indicated Rebar Type.
P NoVisibleRebarHandle	FailureDefinitionId	Editing of the constraints for the selected rebar with free form geometry is not available. However, the default automatic constraints may still work.
P NoVisibleTargetsForCurrentConstraint	FailureDefinitionId	There are no visible constraint targets in the current view. Please switch to another view.
P OutOfPlaneBendDiameterTooSmall	FailureDefinitionId	The Out of Plane Bend Diameter for Rebar Shape XX is too small for Rebar Bar Type YY.
P OutSideOfHost	FailureDefinitionId	Rebar is placed completely outside of its host.
P PathShapeFailure	FailureDefinitionId	Can't solve Rebar Shape in Path Reinforcement.
P RebarArrayTooShort	FailureDefinitionId	Rebar Set can't have coincident Bars.
P RebarBendRadiusTooBig	FailureDefinitionId	Rebar Bend Radius is too big. Ignoring bend.
P RebarBendRadiusTooBigWarn	FailureDefinitionId	Rebar Bend Radius is too big. Ignoring bend.
P RebarCannotBeDeleted	FailureDefinitionId	You cannot delete all bars for the sets that are being edited.
P RebarConstraintWarning	FailureDefinitionId	Structural rebar have automatic constraints that may conflict with dimensional constraints. Using dimensional constraints with structural rebar is not recommended and should be avoided.\nGrouped structural rebar is the only exception to this recommendation, since the automatic constraints are removed on grouped rebar.
P RebarContainerOutSideOfHostWarning	FailureDefinitionId	Rebar Container is placed completely outside of its host.
P RebarCrankCannotBeAddedToShape	FailureDefinitionId	Cannot add crank to this type of Rebar Shape.
P RebarCrankOverEndTreatment	FailureDefinitionId	Cannot add crank to the end that already has an end treatment.
P RebarCrankOverHook	FailureDefinitionId	Cannot add crank to the end that already has a hook.
P RebarDimensionalConstraintLost	FailureDefinitionId	Dimensional constraint on Rebar element was lost on upgrade.
P RebarEndTreatmentOverCrank	FailureDefinitionId	Cannot add end treatment to the end that already has a crank.
P RebarEndTreatmentOverHook	FailureDefinitionId	Cannot add end treatment to the end that already has a hook.
P RebarHookOverCrank	FailureDefinitionId	Cannot add hook to the end that already has a crank.
P RebarHookOverEndTreatment	FailureDefinitionId	Cannot add hook to the end that already has an end treatment.
P RebarHooksDontMatchShape	FailureDefinitionId	The Rebar's hooks do not match its Rebar Shape.
P RebarIllegalBarType	FailureDefinitionId	There is Structural Rebar present in the project that no longer meet the criteria defined in Allowable Rebar Bar types parameter. Please review all existing Structural Rebar created with this Shape.
P RebarInvalidDiameterRemoved	FailureDefinitionId	Invalid RebarBarType was removed on upgrade.
P RebarInvalidRunnout	FailureDefinitionId	The remainder is less than one bar diameter, which may result in double counting in schedules. Adjust the layout or remove one of the overlapped bars.
P RebarMovedBarsOverlapped	FailureDefinitionId	There are identical overlapping bars in the rebar set. This will result in double counting in schedules.
P RebarNoConstraints	FailureDefinitionId	The constraints for the rebar with free form geometry are not set or modifications have caused the automatic constraints to be deleted. You can use Edit Constraints to assign new bar constraints.
P RebarNoMatchingHooks	FailureDefinitionId	The Rebar Shape '[Family Name]' has no matching hooks.
P RebarShapeFailure	FailureDefinitionId	Can't solve Rebar Shape.
P RebarShapeFailureCustomError	FailureDefinitionId	'[ErrorMessage]'
P RebarShapeFailureCustomWarning	FailureDefinitionId	'[ErrorMessage]'
P RebarShapeFailureDueToStaggerOffset	FailureDefinitionId	Can't solve Rebar Shape using the existing stagger offsets.
P RebarSpacingTooSmall	FailureDefinitionId	Bar Spacing is too small.
P RebarTooShortImperial	FailureDefinitionId	The minimum length of rebar shape is 1 inch.
P RebarTooShortMetric	FailureDefinitionId	The minimum length of rebar shape is 25 mm.
P RemoveSpliceBetweenBars	FailureDefinitionId	Splice cannot be maintained.
P SketchDimensionsRemoved	FailureDefinitionId	The sketch dimensions, that were used to create the sketch, have been removed from the completed rebar shape definition.
P SketchDimsBWFRemoved	FailureDefinitionId	The sketch dimensions, that were used to create the sketch, have been removed from the completed bend profile definition.
P SketchFreeFormSet	FailureDefinitionId	Sketching of a free form set produces only a single bar.
P SketchNonPlanarFreeForm	FailureDefinitionId	The selected free form rebar is not planar. Sketching it will discard the current geometry.
P SpliceTypeWasDeleted	FailureDefinitionId	Splice type was deleted.
P StandardHookBendDiameterTooLarge	FailureDefinitionId	Rebar Standard Hook Bend Diameter is too large.
P StandardHookBendDiameterTooSmall	FailureDefinitionId	Rebar Standard Hook Bend Diameter is too small.
P TooLargeNumberOfBars	FailureDefinitionId	The number of bars in the set cannot exceed 1002.
P TooSmallNumberOfBars	FailureDefinitionId	Rebar Set must contain at least two bar locations.
P TooSmallRebarSetForCurrentFormula	FailureDefinitionId	Rebar set is too small for the current layout formula.
P TrySmallerBarType	FailureDefinitionId	Rebar Bend Diameter is too large. Try a smaller Bar Type.
P UnconstrainableRebarHandle	FailureDefinitionId	The rebar handle does not have any constraint targets.