Sign in
2020 Class Back to 2020
C

RebarShape

Version comparison
2020 2021 2022 2023 2024 2025 2025.3 2026 2027

Members across versions

25 members across 9 versions · 7 added later · 9 removed · 9 changed · 9 obsolete

Member-name color: stable · changed · removed · obsolete · added later

Member 2020 2021 2022 2023 2024 2025 2025.3 2026 2027
M Create(Document, RebarShapeDefinition, RebarShapeMultiplanarDefinition, RebarStyle, StirrupTieAttachmentType, Int32, RebarHookOrientation, Int32, RebarHookOrientation, Int32)
same same same same same same same changed missing
M Create(Document, RebarShapeDefinition, RebarShapeMultiplanarDefinition, RebarStyle, StirrupTieAttachmentType, Int32, RebarHookOrientation, Int32, RebarHookOrientation, Int32, Double, Double, ElementId, ElementId)
not yet introduced added same same same same same changed missing
M Create(Document, RebarShapeDefinition, RebarShapeMultiplanarDefinition, RebarStyle, StirrupTieAttachmentType, Int32, RebarShapeTerminationsData)
not yet introduced not yet introduced not yet introduced not yet introduced not yet introduced not yet introduced not yet introduced added same
M GetAllowed(RebarBarType)
same same same same same same same same same
M GetCurvesForBrowser
same same same same same same same same same
M GetDefaultHookAngle(Int32)
same same same same same same same changed missing
M GetDefaultHookOrientation(Int32)
same same same same same same same changed missing
M GetEndTreatmentTypeId(Int32)
same same same same same same same changed missing
M GetHookRotationAngle(Int32)
not yet introduced added same same same same same changed missing
M GetMultiplanarDefinition
same same same same same same same same same
M GetRebarShapeDefinition
same same same same same same same same same
M GetTerminationsData
not yet introduced not yet introduced not yet introduced not yet introduced not yet introduced not yet introduced not yet introduced added same
M HasEndTreatment
same same same same same same same same same
M IsSameShapeIgnoringHooks(RebarShape)
same same same same same same same changed missing
M IsSameShapeIgnoringTerminations(RebarShape)
not yet introduced not yet introduced not yet introduced not yet introduced not yet introduced not yet introduced not yet introduced added same
M RebarShapeMatchesCurvesAndTerminationsData(RebarShape, RebarBarType, XYZ, IList<Curve>, RebarShapeTerminationsData)
not yet introduced not yet introduced not yet introduced not yet introduced not yet introduced not yet introduced not yet introduced added same
M SetAllowed(RebarBarType, Boolean)
same same same same same same same same same
M SetEndTreatmentTypeId(ElementId, Int32)
same changed same same same same same changed missing
M SetHookRotationAngle(Double, Int32)
not yet introduced added same same same same same changed missing
P HigherEnd
same same same same same same same same same
P RebarStyle
same same same same same same same same same
P ShapeFamilyId
same same same same same same same same same
P SimpleArc
same same same same same same same same same
P SimpleLine
same same same same same same same same same
P StirrupTieAttachment
same same same same same same same same same

Per-version detail

Click a version below to see what changed in that release vs your current frame (2020).
2020 current

Changes in 2021 vs 2020 3 added 1 changed

Flip API Versions →

Added in 2021 (new since 2020)

Create(Document, RebarShapeDefinition, RebarShapeMultiplanarDefinition, RebarStyle, StirrupTieAttachmentType, Int32, RebarHookOrientation, Int32, RebarHookOrientation, Int32, Double, Double, ElementId, ElementId) GetHookRotationAngle(Int32) SetHookRotationAngle(Double, Int32)

Changed members

RebarShape.SetEndTreatmentTypeId(ElementId, Int32, ElementId)
treatmenetId ElementId
iEnd Int32
endTreatmentId ElementId The id of an EndTreatmentType element, or invalidElementId if the rebar shape should have no end treatment at the specified end.

Changes in 2022 vs 2020 3 added 1 changed

Flip API Versions →

Added in 2022 (new since 2020)

Create(Document, RebarShapeDefinition, RebarShapeMultiplanarDefinition, RebarStyle, StirrupTieAttachmentType, Int32, RebarHookOrientation, Int32, RebarHookOrientation, Int32, Double, Double, ElementId, ElementId) GetHookRotationAngle(Int32) SetHookRotationAngle(Double, Int32)

Changed members

RebarShape.SetEndTreatmentTypeId(ElementId, Int32, ElementId)
treatmenetId ElementId
iEnd Int32
endTreatmentId ElementId The id of an EndTreatmentType element, or invalidElementId if the rebar shape should have no end treatment at the specified end.

Changes in 2023 vs 2020 3 added 1 changed

Flip API Versions →

Added in 2023 (new since 2020)

Create(Document, RebarShapeDefinition, RebarShapeMultiplanarDefinition, RebarStyle, StirrupTieAttachmentType, Int32, RebarHookOrientation, Int32, RebarHookOrientation, Int32, Double, Double, ElementId, ElementId) GetHookRotationAngle(Int32) SetHookRotationAngle(Double, Int32)

Changed members

RebarShape.SetEndTreatmentTypeId(ElementId, Int32, ElementId)
treatmenetId ElementId
iEnd Int32
endTreatmentId ElementId The id of an EndTreatmentType element, or invalidElementId if the rebar shape should have no end treatment at the specified end.

Changes in 2024 vs 2020 3 added 1 changed

Flip API Versions →

Added in 2024 (new since 2020)

Create(Document, RebarShapeDefinition, RebarShapeMultiplanarDefinition, RebarStyle, StirrupTieAttachmentType, Int32, RebarHookOrientation, Int32, RebarHookOrientation, Int32, Double, Double, ElementId, ElementId) GetHookRotationAngle(Int32) SetHookRotationAngle(Double, Int32)

Changed members

RebarShape.SetEndTreatmentTypeId(ElementId, Int32, ElementId)
treatmenetId ElementId
iEnd Int32
endTreatmentId ElementId The id of an EndTreatmentType element, or invalidElementId if the rebar shape should have no end treatment at the specified end.

Changes in 2025 vs 2020 3 added 1 changed

Flip API Versions →

Added in 2025 (new since 2020)

Create(Document, RebarShapeDefinition, RebarShapeMultiplanarDefinition, RebarStyle, StirrupTieAttachmentType, Int32, RebarHookOrientation, Int32, RebarHookOrientation, Int32, Double, Double, ElementId, ElementId) GetHookRotationAngle(Int32) SetHookRotationAngle(Double, Int32)

Changed members

RebarShape.SetEndTreatmentTypeId(ElementId, Int32, ElementId)
treatmenetId ElementId
iEnd Int32
endTreatmentId ElementId The id of an EndTreatmentType element, or invalidElementId if the rebar shape should have no end treatment at the specified end.

Changes in 2025.3 vs 2020 3 added 1 changed

Flip API Versions →

Added in 2025.3 (new since 2020)

Create(Document, RebarShapeDefinition, RebarShapeMultiplanarDefinition, RebarStyle, StirrupTieAttachmentType, Int32, RebarHookOrientation, Int32, RebarHookOrientation, Int32, Double, Double, ElementId, ElementId) GetHookRotationAngle(Int32) SetHookRotationAngle(Double, Int32)

Changed members

RebarShape.SetEndTreatmentTypeId(ElementId, Int32, ElementId)
treatmenetId ElementId
iEnd Int32
endTreatmentId ElementId The id of an EndTreatmentType element, or invalidElementId if the rebar shape should have no end treatment at the specified end.

Changes in 2026 vs 2020 7 added 6 changed

Flip API Versions →

Added in 2026 (new since 2020)

Create(Document, RebarShapeDefinition, RebarShapeMultiplanarDefinition, RebarStyle, StirrupTieAttachmentType, Int32, RebarHookOrientation, Int32, RebarHookOrientation, Int32, Double, Double, ElementId, ElementId) Create(Document, RebarShapeDefinition, RebarShapeMultiplanarDefinition, RebarStyle, StirrupTieAttachmentType, Int32, RebarShapeTerminationsData) GetHookRotationAngle(Int32) GetTerminationsData IsSameShapeIgnoringTerminations(RebarShape) RebarShapeMatchesCurvesAndTerminationsData(RebarShape, RebarBarType, XYZ, IList<Curve>, RebarShapeTerminationsData) SetHookRotationAngle(Double, Int32)

Changed members

RebarShape.Create(Document, RebarShapeDefinition, RebarShapeMultiplanarDefinition, RebarStyle, StirrupTieAttachmentType, Int32, RebarHookOrientation, Int32, RebarHookOrientation, Int32)
No longer obsolete in 2020 (was obsolete in 2026)
doc Document A document to contain the RebarShape.
definition RebarShapeDefinition The definition of the rebar shape, as a set of curves in a plane driven by parameters.
multiplanarDefinition RebarShapeMultiplanarDefinition If not null, the created RebarShape will be a 3D shape. The shape is built out of the planar RebarShapeDefinition, with additional out-of-plane segments defined by the RebarShapeMultiplanarDefinition object. Not supported in conjunction with RebarShapeDefinitionByArc of type Spiral or LappedCircle.
style RebarStyle Whether the shape is to be used as a standard bar or a stirrup/tie.
attachmentType StirrupTieAttachmentType When the style is stirrup/tie, specify whether it will attach to the interior of cover (cover is measured to the stirrups), or to the exterior of cover (cover is measured to the standard bars). Ignored when the style is Standard.
startHookAngle Int32 The start hook angle, expressed as an integral number of degrees. If 0, the shape will have no start hook. Common values are 0, 90, 135, and 180.
startHookOrientation RebarHookOrientation The orientation of the start hook. Ignored when startHookAngle is 0.
endHookAngle Int32 The end hook angle, expressed as an integral number of degrees. If 0, the shape will have no end hook. Common values are 0, 90, 135, and 180.
endHookOrientation RebarHookOrientation The orientation of the end hook. Ignored when endHookAngle is 0.
higherEnd Int32 When the rebar crosses itself, one end will be "lifted" to avoid self-intersection. Specify which end should be lifted: 0 for start, 1 for end.
→ returns RebarShape A new RebarShape instance.
RebarShape.GetDefaultHookAngle(Int32, Int32)
No longer obsolete in 2020 (was obsolete in 2026)
index Int32 0 for the starting hook, 1 for the ending hook.
end Int32 0 for the starting hook, 1 for the ending hook.
→ returns Int32 Int32
RebarShape.GetDefaultHookOrientation(Int32, Int32)
No longer obsolete in 2020 (was obsolete in 2026)
index Int32 0 for the starting hook, 1 for the ending hook.
end Int32 0 for the termination at start, 1 for the termination at end.
→ returns RebarHookOrientation Returns the termination's orientation. The orientation it's the same for both hook and crank.
RebarShape.GetEndTreatmentTypeId(Int32, Int32)
No longer obsolete in 2020 (was obsolete in 2026)
iEnd Int32
end Int32 0 for the start end treatment, 1 for the end end treatment.
→ returns ElementId Returns the id of an EndTreatmentType, or invalidElementId if the rebar shape has no end treatment at the specified end.
RebarShape.IsSameShapeIgnoringHooks(RebarShape)
No longer obsolete in 2020 (was obsolete in 2026)
otherShape RebarShape Another shape to be compared to this one.
→ returns Boolean True if the shape definitions match, false otherwise.
RebarShape.SetEndTreatmentTypeId(ElementId, Int32, ElementId, Int32)
No longer obsolete in 2020 (was obsolete in 2026)
treatmenetId ElementId
iEnd Int32
endTreatmentId ElementId The id of an EndTreatmentType element, or invalidElementId if the rebar shape should have no end treatment at the specified end.
end Int32 0 for the start end treatment, 1 for the end end treatment.

Changes in 2027 vs 2020 4 added 6 missing

Flip API Versions →

Added in 2027 (new since 2020)

Create(Document, RebarShapeDefinition, RebarShapeMultiplanarDefinition, RebarStyle, StirrupTieAttachmentType, Int32, RebarShapeTerminationsData) GetTerminationsData IsSameShapeIgnoringTerminations(RebarShape) RebarShapeMatchesCurvesAndTerminationsData(RebarShape, RebarBarType, XYZ, IList<Curve>, RebarShapeTerminationsData)

Missing in 2027 (only available in 2020)

Create(Document, RebarShapeDefinition, RebarShapeMultiplanarDefinition, RebarStyle, StirrupTieAttachmentType, Int32, RebarHookOrientation, Int32, RebarHookOrientation, Int32) GetDefaultHookAngle(Int32) GetDefaultHookOrientation(Int32) GetEndTreatmentTypeId(Int32) IsSameShapeIgnoringHooks(RebarShape) SetEndTreatmentTypeId(ElementId, Int32)