RebarShape

RebarShape.Create(Document, RebarShapeDefinition, RebarShapeMultiplanarDefinition, RebarStyle, StirrupTieAttachmentType, Int32, RebarHookOrientation, Int32, RebarHookOrientation, Int32)

⊘No longer obsolete in 2024 (was obsolete in 2026)

doc	Document	A document to contain the RebarShape.
definition	RebarShapeDefinition	The definition of the rebar shape, as a set of curves in a plane driven by parameters.
multiplanarDefinition	RebarShapeMultiplanarDefinition	If not null, the created RebarShape will be a 3D shape. The shape is built out of the planar RebarShapeDefinition, with additional out-of-plane segments defined by the RebarShapeMultiplanarDefinition object. Not supported in conjunction with RebarShapeDefinitionByArc of type Spiral or LappedCircle.
style	RebarStyle	Whether the shape is to be used as a standard bar or a stirrup/tie.
attachmentType	StirrupTieAttachmentType	When the style is stirrup/tie, specify whether it will attach to the interior of cover (cover is measured to the stirrups), or to the exterior of cover (cover is measured to the standard bars). Ignored when the style is Standard.
startHookAngle	Int32	The start hook angle, expressed as an integral number of degrees. If 0, the shape will have no start hook. Common values are 0, 90, 135, and 180.
startHookOrientation	RebarHookOrientation	The orientation of the start hook. Ignored when startHookAngle is 0.
endHookAngle	Int32	The end hook angle, expressed as an integral number of degrees. If 0, the shape will have no end hook. Common values are 0, 90, 135, and 180.
endHookOrientation	RebarHookOrientation	The orientation of the end hook. Ignored when endHookAngle is 0.
higherEnd	Int32	When the rebar crosses itself, one end will be "lifted" to avoid self-intersection. Specify which end should be lifted: 0 for start, 1 for end.
→ returns	RebarShape	A new RebarShape instance.

RebarShape.Create(Document, RebarShapeDefinition, RebarShapeMultiplanarDefinition, RebarStyle, StirrupTieAttachmentType, Int32, RebarHookOrientation, Int32, RebarHookOrientation, Int32, Double, Double, ElementId, ElementId, Double, Double)

⊘No longer obsolete in 2024 (was obsolete in 2026)

doc	Document	A document to contain the RebarShape.
definition	RebarShapeDefinition	The definition of the rebar shape, as a set of curves in a plane driven by parameters.
multiplanarDefinition	RebarShapeMultiplanarDefinition	If not <span class="keyword">null</span><span class="nu">a null reference (<span class="keyword">Nothing</span> in Visual Basic)</span>, the created RebarShape will be a 3D shape. The shape is built out of the planar RebarShapeDefinition, with additional out-of-plane segments defined by the RebarShapeMultiplanarDefinition object. Not supported in conjunction with RebarShapeDefinitionByArc of type Spiral or LappedCircle.
style	RebarStyle	Whether the shape is to be used as a standard bar or a stirrup/tie.
attachmentType	StirrupTieAttachmentType	When the style is stirrup/tie, specify whether it will attach to the interior of cover (cover is measured to the stirrups), or to the exterior of cover (cover is measured to the standard bars). Ignored when the style is Standard.
startHookAngle	Int32	The start hook angle, expressed as an integral number of degrees. If 0, the shape will have no start hook. Common values are 0, 90, 135, and 180.
startHookOrientation	RebarHookOrientation	The orientation of the start hook. Ignored when startHookAngle is 0.
endHookAngle	Int32	The end hook angle, expressed as an integral number of degrees. If 0, the shape will have no end hook. Common values are 0, 90, 135, and 180.
endHookOrientation	RebarHookOrientation	The orientation of the end hook. Ignored when endHookAngle is 0.
higherEnd	Int32	When the rebar crosses itself, one end will be "lifted" to avoid self-intersection. Specify which end should be lifted: 0 for start, 1 for end.
hookRotationAngleAtStart	Double	The out of plane hook rotation angle at the start of the bar.
hookRotationAngleAtEnd	Double	The out of plane hook rotation angle at the end of the bar.
endTreatmentTypeIdAtStart	ElementId	The end treatment type id at the start of the bar.
endTreatmentTypeIdAtEnd	ElementId	The end treatment type id at the end of the bar.
terminationRotationAngleAtStart	Double	The termination's (e.g hook) out of plane rotation angle at the start of the bar.
terminationRotationAngleAtEnd	Double	The termination's (e.g hook) out of plane rotation angle at the end of the bar.
→ returns	RebarShape	A new RebarShape instance.

RebarShape.GetDefaultHookAngle(Int32, Int32)

⊘No longer obsolete in 2024 (was obsolete in 2026)

index	Int32	0 for the starting hook, 1 for the ending hook.
end	Int32	0 for the starting hook, 1 for the ending hook.
→ returns	Int32	Int32

RebarShape.GetDefaultHookOrientation(Int32, Int32)

⊘No longer obsolete in 2024 (was obsolete in 2026)

index	Int32	0 for the starting hook, 1 for the ending hook.
end	Int32	0 for the termination at start, 1 for the termination at end.
→ returns	RebarHookOrientation	Returns the termination's orientation. The orientation it's the same for both hook and crank.

RebarShape.GetEndTreatmentTypeId(Int32, Int32)

⊘No longer obsolete in 2024 (was obsolete in 2026)

iEnd	Int32	0 for the start end treatment, 1 for the end end treatment.
end	Int32	0 for the start end treatment, 1 for the end end treatment.
→ returns	ElementId	Returns the id of an EndTreatmentType, or invalidElementId if the rebar shape has no end treatment at the specified end.

RebarShape.GetHookRotationAngle(Int32, Int32)

⊘No longer obsolete in 2024 (was obsolete in 2026)

iEnd	Int32	0 for the start , 1 for the end.
end	Int32	0 for the start, 1 for the end.
→ returns	Double	Returns the out of plane hook rotation angle at the specified end.

RebarShape.IsSameShapeIgnoringHooks(RebarShape)

⊘No longer obsolete in 2024 (was obsolete in 2026)

otherShape	RebarShape	Another shape to be compared to this one.
→ returns	Boolean	True if the shape definitions match, false otherwise.

RebarShape.SetEndTreatmentTypeId(ElementId, Int32, Int32)

⊘No longer obsolete in 2024 (was obsolete in 2026)

endTreatmentId	ElementId	The id of an EndTreatmentType element, or invalidElementId if the rebar shape should have no end treatment at the specified end.
iEnd	Int32	0 for the start end treatment, 1 for the end end treatment.
end	Int32	0 for the start end treatment, 1 for the end end treatment.

RebarShape.SetHookRotationAngle(Double, Int32, Double, Int32)

⊘No longer obsolete in 2024 (was obsolete in 2026)

hookRotationAngle	Double	The out of plane hook rotation angle at the specified end.
iEnd	Int32	0 for the start , 1 for the end.
rotationAngle	Double	The out of plane rotation angle at the specified end. The angle will be used for both hook and crank.
end	Int32	0 for the start, 1 for the end.